Models > JVM1339BW02 > Instructions

JVM1339BW02 General Electric Microwave - Instructions

All installation instructions for JVM1339BW02 parts

These instructions have been submitted by other PartSelect customers and can help guide you through the microwave repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the JVM1339BW02
1-15 of 197
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Microwave Cooking Tray Missing

  • Customer: Chris from Elmhurst NY
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 519 of 583 people found this instruction helpful
I ordered a microwave cooking tray from PartSelect; userfriendly site; and within two days, my part was delievered and easily installed. Thank you PartSelect!

Microwave Door Handle Broken

  • Customer: Kristofer from Wayne PA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 462 of 464 people found this instruction helpful
This repair is simple if you know what needs to be done. In my particular case, only the top screw was exposed from the inside of the microwave door. In order to get to the bottom screw, I had to pry the thin, rectangular trim away from the door. A thin, hard pry blade works good for this. Once you get one corner free, the rest of it pulls off pretty easily. I removed both screws, replaced the handle with the new one and secured the new one with the old screws. The new handle does NOT come with new screws, so you will need to buy new ones if you don't have the screws from the previous handle. Overall, it was a very simple fix worth doing yourself.

Broken Handle

  • Customer: Bernadette from Arlington MA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 440 of 517 people found this instruction helpful
I removed the screw from top. I pried of the edge with the casing with the flat end of a screwdriver. I removed the bottom screw. I then put the new handle in place and screwed it in place.

Broken oven tray

  • Customer: Scott from Atlanta GA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 438 of 516 people found this instruction helpful
replace new tray with no tools needed

broken handle at lower screw

  • Customer: BART from MASSAPEQUA PARK NY
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 146 of 209 people found this instruction helpful
Opened door, partially removed inner frame holding window in place by carefully sliding a small putty knife along outer edge of frame.This was the key to get to lower screw. This frame is held in place by plastic nubs on frame.. Be careful.
Removed upper and lower screws holding handle and replaced old handle with new one using same screws. Reset frame by gently pushing it back in place.

The door handle broke at the at the point where the handle screws to the door

  • Customer: Biddanda from Johnson City TN
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 177 of 322 people found this instruction helpful
Unscrewed the top screw from indide the door panel. To remove the lower screw I had to gently separate the square seal which goes on the inside door panel. Once I removed the two screws, I could attach the new handle, put the lining back and the job was done.

The new part did not come with new set of screws. It should have!!

cooking tray brook

  • Customer: Giuseppe from Elmwood Park IL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 138 of 216 people found this instruction helpful
none

Broken Door Handle

  • Customer: Carol from Cornwall NY
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 156 of 298 people found this instruction helpful
First I removed the upper handle screw. In order to get to the second screw holding the bottom of the handle, I removed the inner door window seal with a putty knife then removed the second screw. I installed the new handle, attached the screws and replaced the seal and that's all there was to it. The whole repair was done in 2 minutes.

Plastic handle broke off at the bottom

  • Customer: Charles R from Harrisburg PA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 150 of 287 people found this instruction helpful
Removed one screw on the inside of the door, upper left hand corner. With a small knife,lifted the small plastic seal around the inside glass. Removed the 2nd screw at the bottom left on the inside of door. Attached the new handle with the two screws, replaced the plastic seal on the inside and it was ready to go. Simple and took less than 10 minutes. No service call or repairman required. Reviewing the comments at your website was very helpful to get started. Thanks for a great deal! Chuck in Harrisburg,PA

cooking tray (glass) broke

  • Customer: Magda from Beverly Hills MI
  • Difficulty: Really easy
  • Time to Complete: More than 2 hours
  • Tools Required:
  • 147 of 286 people found this instruction helpful
Took out broken piece
Called GE Parts to order replacement
Upon arrival, opened package, took out new part, inserted it where old part had been.

plastic handle to over-range microwave broke and need to be replaced

  • Customer: Dan from Arlington VA
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 147 of 285 people found this instruction helpful
Firts removed the phillips head screw securing the door handle on the inside top of the microwave door. Then used putty knife to dislodge the plastic surrounding the window on the back of the microwave door...thus uncovering the 2nd screw that holds the bottom of the plastic door handle. Removed the 2nd screw. Removed the broken handle. Put the replacement handle in position and secured with the two phillips head screws. Pressed the plastic back in place around the door window. Voila! It's done. Took about 10 minutes

Light bulb out, tried to remove, lamp socket broke

  • Customer: Gene from Urbana IL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 77 of 86 people found this instruction helpful
Above the stove mounted microwave. I dropped the lens cover from under the bulb and tried to remove the bulb. The bulb separated from the base. I tried to remove the base with a pliers and the lamp socket broke. I ordered the parts and dropped the bottom cover of the unit down (5 screws). Removed 1 screww from the lamp socket, unplugged the wires and took it out. Simply replaced socket, fastened bottom cover of microwave, installed new bulb and closed lens cover.

Broken carousel plate

  • Customer: Ronald from Casa Grande AZ
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 142 of 281 people found this instruction helpful
Opened the microwave door and put the new plate on the carousel. Duh!

the cooking tray went crash!

  • Customer: lisa from monroe township nj NJ
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 140 of 279 people found this instruction helpful
I ordered on tuesday right before Thanksgiving and was sick my tray plate broke with a house full of company comming for the holiday and no microwave low and behold i ordered on tuesday and it was at my door on wednesday what a shock i will forever be a loyal customer thanks part select!!!

Broken Cooking Tray

  • Customer: Berney from Madison AL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 139 of 278 people found this instruction helpful
Just placed the new tray in the microwave. Simple as that.
All Instructions for the JVM1339BW02
1-15 of 197