Models > JVB37A4BB

JVB37A4BB General Electric Range Hood - Overview

Sections of the JVB37A4BB

[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
Single Roller – Part Number: WC2X5144
Single Roller
PartSelect #: PS257711
Manufacturer #: WC2X5144
This is a single roller and it is a part for multiple appliances in your household. You may also know this as a bearing roller or a wheel assembly. It is roughly one inch by one inch in size, and is s...
  No Longer Available
FILTER HOOD – Part Number: WB02X10304
FILTER HOOD
PartSelect #: PS223613
Manufacturer #: WB02X10304
  No Longer Available
Hood Gear Motor – Part Number: WB26X10050
Hood Gear Motor
★★★★★
★★★★★
(3)
PartSelect #: PS237784
Manufacturer #: WB26X10050
  No Longer Available
Control Board – Part Number: WB27X24888
Control Board
PartSelect #: PS11700833
Manufacturer #: WB27X24888
  No Longer Available
Trim - Black – Part Number: WB07X10013
Trim - Black
PartSelect #: PS229166
Manufacturer #: WB07X10013
  No Longer Available
SWITCH VARIABLE SPEED – Part Number: WB24X10035
SWITCH VARIABLE SPEED
PartSelect #: PS237003
Manufacturer #: WB24X10035
  No Longer Available
KNOB – Part Number: WB03X10005
KNOB
PartSelect #: PS226730
Manufacturer #: WB03X10005
  No Longer Available
TRIM SWITCH EMBOSSED – Part Number: WB07X10216
TRIM SWITCH EMBOSSED
PartSelect #: PS229364
Manufacturer #: WB07X10216
$67.70
  Special Order
CORD POWER – Part Number: WB18X10451
CORD POWER
PartSelect #: PS2374063
Manufacturer #: WB18X10451
$120.84
  Special Order
WIRE BOX GE – Part Number: WB56X10108
WIRE BOX GE
PartSelect #: PS252307
Manufacturer #: WB56X10108
$101.83
  Special Order
SCREW PT BT 6-18 X3/8 N – Part Number: WB01X10005
SCREW PT BT 6-18 X3/8 N
PartSelect #: PS222352
Manufacturer #: WB01X10005
$4.89
  Special Order
BUTTON SLIDE – Part Number: WB01X10007
BUTTON SLIDE
PartSelect #: PS222354
Manufacturer #: WB01X10007
  No Longer Available

Questions And Answers for JVB37A4BB

Be the first to ask our experts a question about this model!

Common Symptoms of the JVB37A4BB

[Viewing 1 of 1]
Drawer is hard to open and or close
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Controller board fried
Disconnected power and removed electrical cover
Disconnected wires from old controller one a time and connected to new controller as to not mismatch wire connections. Left new controller hanging off wires.
Raised vent and held using wood blocks to expose gap to use 1/4 inch wrench to undo screws from the inside (poor design for replacing the controller - this was the bulk of my time.) if this didn't work, I would have had to disassemble more of the downdraft.
Installed new controller.
Removed chocks, enabled power and tested...after verified, re-installed electrical cover.
Parts Used:
Control Board
  • Anthony from Stevensville, MD
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Wrench set
6 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!