This is a single roller and it is a part for multiple appliances in your household. You may also know this as a bearing roller or a wheel assembly. It is roughly one inch by one inch in size, and is s...
Ask our experts a question about this model and we'll get back to you as soon as possible!
1 question answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jon
December 2, 2021
When power turned on, vent raises and lowers continuously without pushing power button
For model number JVB37A1BB
Hello Jon, Thank you for the question. This could be caused by damaged or loose wiring or a faulty Vent Hood Control Board. We hope this helps!
Disconnected power and removed electrical cover Disconnected wires from old controller one a time and connected to new controller as to not mismatch wire connections. Left new controller hanging off wires. Raised vent and held using wood blocks to expose gap to use 1/4 inch wrench to undo screws from the inside (poor design for
... Read more replacing the controller - this was the bulk of my time.) if this didn't work, I would have had to disassemble more of the downdraft. Installed new controller. Removed chocks, enabled power and tested...after verified, re-installed electrical cover.