Models > JV332*02 > Instructions

JV332*02 Hotpoint Range Hood - Instructions

All Instructions for the JV332*02
1 - 3 of 3
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
The grease filter was VERY dirty and beat up.
Tried our local and new Lowe's; clerk said they couldn't find it on their computer. Came home, tried the internet; found one on your site and ordered it; was here in 'a flash'. So happy you had one in stock. Thank you!!!!!
Parts Used:
Grease Filter
  • Betsy from Carlsbad, NM
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
10 of 14 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Lamp switch would not return to original position rendering the switch inoperable.
Remove 6 screws that hold the light and fan filter in place. Remove the four bolts that hold the control panel. Remove the four screws that hold the circuit board to the control panel. Disconnect the wires to the switch. Replace switch and reverse the disassembly procedure.
Parts Used:
UNKNOWN
  • Richard from Lynn, MA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Filter stopped up
Snapped the old one out; snapped the new filter in.
Parts Used:
Grease Filter
  • Billy from Peachland, NC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the JV332*02
1 - 3 of 3
Back to Top