Models > JS48PPFXDA

JS48PPFXDA Jenn-Air Refrigerator - Overview

Get Parts and Repair Help for JS48PPFXDA

If you know the refrigerator repair part you need, you can browse the list of all parts on the JS48PPFXDA, or you can search by name or part description. You can also find your part by where it is located on the JS48PPFXDA by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. We’ve also included any installation videos we have for JS48PPFXDA parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$2.70

Screw

Sold individually.

$49.48

Water Filter

This Puri-Clean water filter will fit most Maytag and Jenn Air refrigerators that have a screw-in filter.

$3.66

Light Bulb - 40W 120V

Sold individually.

$15.79

Water Fill Cup and Bearing

$2.70

Screw

This screw is sold individually.

$2.70

Hose Clamp

$18.02

Icemaker Shut Off Arm

When the icemaker shut off arm is high enought the ice maker will shut off and no more ice will be made until the level of the ice in the bin drops. Also the ice maker can be turne...

$2.70

SCREW

Sold individually.

$24.48

Thermostat with Clips

This part is also known as the cycling thermostat and this bi-metal device controls the activation of the icemaker ejection cycle.

$24.60

BLADE-FAN

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

The Bearing Cup Assembly was broken and ice would jamb against it during the ice making cycle.

  • Customer: David from Chester CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Screw drivers
  • 58 of 71 people found this instruction helpful
I removed the ice maker from the refrigerator, by removing one screw on the underside bracket and loosening the two screws at the top side, then lifting the ice maker off the loosened screws. I then unplugged the electrical harness that supplies power from the refrigerator to the ice maker. I then disassembled the ice maker by removing the front cover whic... read more

Refrigerator Filter needed replacing

  • Customer: Bruce from Alfred Station NY
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 47 of 53 people found this instruction helpful
Turn counter clockwise, following the remove arrow on the filter, until it stops. Wiggle and pull down on the filter until it comes off. Put date sticker on new filter to remember when it was replaced. Align the lines on the filter and push it up where the old one was and turn it clockwise until it stops, following the install arrow. Close the door and p... read more

No ice in ice trey

  • Customer: Wayne from Leesburg FL
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers, Socket set
  • 41 of 47 people found this instruction helpful
The easiest thing to do was pull the ice make off. After taking the 3 screws out of the wall of the freezer, take a screwdriver (flathead) and push on the tab for the electrical plug and wiggle the cord out. Then you can take 3 screws out for the main cover and another 2 screws on the next cover. There's the part, pop it out and replace holding pins and star... read more