Models > JP676101

JP676101 General Electric Range - Overview

Sections of the JP676101

[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
Drip Bowl - 6 Inch – Part Number: WB32X107
Drip Bowl - 6 Inch
★★★★★
★★★★★
(23)
PartSelect #: PS244697
Manufacturer #: WB32X107
The drip bowl on your range is designed to catch any spills that may occur when cooking. This drip bowl is chrome in color and is 6 inches in diameter. The chrome drip bowl is intended for use with ro...
$11.92
  In Stock
Order within the next 9 hrs and your part ships today!
Drip Bowl - 8 Inch – Part Number: WB32X106
Drip Bowl - 8 Inch
★★★★★
★★★★★
(15)
PartSelect #: PS244696
Manufacturer #: WB32X106
Drip bowls are located under the heating elements and catch grease and spills that come from cooking on your stove top. If your drip bowl is damaged or rusted, it could allow grease to drip inside you...
$22.07
  In Stock
Order within the next 9 hrs and your part ships today!
INFINITE HEAT SWITCH KIT – Part Number: WB21X36771
INFINITE HEAT SWITCH KIT
★★★★★
★★★★★
(15)
PartSelect #: PS16216966
Manufacturer #: WB21X36771
The infinite switch controls the stove top surface burner. This switch will work with most of the electrical range models with coil burner elements.
$51.36
  In Stock
Order within the next 9 hrs and your part ships today!
Surface Burner - 8 Inch - 2100W – Part Number: WB30X253
Surface Burner - 8 Inch - 2100W
★★★★★
★★★★★
(4)
PartSelect #: PS244014
Manufacturer #: WB30X253
This part is the replacement surface burner or element for your range. It is approximately 8 inches in diameter, and 2100 watts. The surface burner connects to the power source and when it is turned o...
$63.08
  In Stock
Order within the next 9 hrs and your part ships today!
Rolled Terminal Surface Unit - 6" - 1250W – Part Number: WB30X254
Rolled Terminal Surface Unit - 6" - 1250W
★★★★★
★★★★★
(1)
PartSelect #: PS244015
Manufacturer #: WB30X254
$60.28
  In Stock
Order within the next 9 hrs and your part ships today!
Receptacle Kit – Part Number: WB17X5088
Receptacle Kit
PartSelect #: PS232632
Manufacturer #: WB17X5088
NOTE: Terminal block is NOT included.
$53.10
  Special Order
Broiler Pan and Rack - Small – Part Number: WB48X10055
Broiler Pan and Rack - Small
PartSelect #: PS1517611
Manufacturer #: WB48X10055
  No Longer Available
WASHER – Part Number: WB1K38
WASHER
PartSelect #: PS234124
Manufacturer #: WB1K38
$7.16
  In Stock
Order within the next 9 hrs and your part ships today!
GRIDDLE, SILVERTONE – Part Number: WB49X5575
GRIDDLE, SILVERTONE
PartSelect #: PS250166
Manufacturer #: WB49X5575
  No Longer Available
DISCONTINUED – Part Number: WB17X200
DISCONTINUED
PartSelect #: PS232603
Manufacturer #: WB17X200
  No Longer Available
SWITCH,FAN – Part Number: WB24X5191
SWITCH,FAN
PartSelect #: PS237250
Manufacturer #: WB24X5191
  No Longer Available
DISCONTINUED – Part Number: WB3X5634
DISCONTINUED
PartSelect #: PS248864
Manufacturer #: WB3X5634
  No Longer Available

Questions And Answers for JP676101

Be the first to ask our experts a question about this model!

Common Symptoms of the JP676101

[Viewing 1 of 1]
Element will not heat
Fixed by
these parts
Fixing Fixing Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Control switch did not function and one burner worked only occasionally
First, I used the PatrSelect website, which has great prices, and has helpful diagrams. Once I had all the parts, I worked with my wife to turn off the power at our home junction box. Next, I lifted off the cover over the control area of this range. I removed four nuts to lift out the panel that holds the four controls and the fan switch. I removed the wires from the broken controls, removed the two screws holding each control in place, then screwed the new ones in place. I would recommend trimming the posts on the controls to the correct size before screwing them in place, because it is easier to grip them and not bend them when they are not mounted. I reconnected the wires and replaced the panel. For the "receptacle", I followed the instructions provided regarding cutting the wire and placing the wire nut and heat shrink tubing. I opened the unit that houses the burners to get easy access.
Parts Used:
Drip Bowl - 6 Inch Drip Bowl - 8 Inch Rolled Terminal Surface Unit - 6" - 1250W Surface Burner - 8 Inch - 2100W INFINITE HEAT SWITCH KIT Receptacle Kit
  • Gregory from Princeton Junction, NJ
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
24 of 36 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Large burner would operate on high setting only.
1. Removed the back panel.
2. Disconnected the wires from the old switch while connecting wires to the new switch one at a time.
3. Installed the new switch and broke off the excess metal on the post which fits into the burner knob on front of the range.
4. Replaced the burner knob and replaced the back panel.
Parts Used:
INFINITE HEAT SWITCH KIT
  • Ernest from Bellevue, NE
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Socket set
20 of 24 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Could not find the correct replacements (burners & drip pans)
After months of buying the wrong parts & cost I discovered this site So easy to order & quick delivery, plus very easy installation. Thank you. I also wanted to add that the reps (Tanisha & Matthew) were extremely helpful & informative. I can only hope all the reps equal their performance. I will definitely be using this site, before any other source. Knowledge & cost is also important to me & that need was met. Good job!
Parts Used:
Drip Bowl - 6 Inch Drip Bowl - 8 Inch
  • Barbara from JEFFERSON, GA
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
13 of 21 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!