Models
>
JP389BJ1BB
JP389BJ1BB General Electric Cooktop - Overview
Sections of the JP389BJ1BB
[Viewing 3 of 3]
Manuals & Care Guides for JP389BJ1BB
Click to downloadKeep searches simple, eg. "belt" or "pump".
Grease Filter
PartSelect #: PS243130
Manufacturer #: WB2X8422
Used with a 30" range hood. Sold individually.
No Longer Available
Knob
PartSelect #: PS226813
Manufacturer #: WB03X10089
This knob takes a D-shaped shaft.
No Longer Available
Infinite Burner Switch
PartSelect #: PS236434
Manufacturer #: WB23X10009
Sold Individually. Order quantity required.
No Longer Available
Grille Grate
PartSelect #: PS244782
Manufacturer #: WB32X5058
Sold individually.
No Longer Available
Questions And Answers for JP389BJ1BB
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Sort by:
- < Prev
- 1
- Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Wanda
November 8, 2021
I need a grease jar for this downdraft cooktop. What part number do I use? I saw one that said $118. Surely a jar couldn’t cost that much. Please help.
For model number JP389BJ1BB
Hello Wanda, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS1015842. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
Related Parts:
GREASE JAR
$133.03
Special Order
- < Prev
- 1
- Next >
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Knob-shaft on element switch broke
***** Unplug the stove *****
1. Removed all knobs, including knobs for other elements and exhaust fan. Because there was years of oil build-up, I used a screwdriver to gently pry off the knobs from the shaft.
2. Remove lock nut from all switches using pliers to first loosen the nuts. Once loosened, I used my fingers to remove th ... Read more e nuts.
3. Remove the rubber gaskets from the element switches, NOT the exhaust fan switch. The exhaust knob gasket is part of the larger glass cover-plate gasket.
4. Remove the glass cover plate to expose the switches. There were two phillips screws to secure the switch plate to the electrical box. Took those off to access the switch.
5. Made a quick sketch of the electrical connections.
6. Removed the damaged switch and the electrical connections.
7. Connected electrical wires to new switch and installed new switch.
8. Took the opportunity to thoroughly clean the glass cover plate and gaskets.
9. Screwed the switch plate back onto the electrical box.
10. Put back glass plate and reinserted the knob gaskets.
11. Put back the lock nuts. Used fingers to tighten then used pliers to give it another quarter turn, making sure not to over tighten.
12. Replaced knobs.
13. Plugged in stove and tested.
Start to finish, it took about 15-20 minutes (mostly due to the cleaning).
1. Removed all knobs, including knobs for other elements and exhaust fan. Because there was years of oil build-up, I used a screwdriver to gently pry off the knobs from the shaft.
2. Remove lock nut from all switches using pliers to first loosen the nuts. Once loosened, I used my fingers to remove th ... Read more e nuts.
3. Remove the rubber gaskets from the element switches, NOT the exhaust fan switch. The exhaust knob gasket is part of the larger glass cover-plate gasket.
4. Remove the glass cover plate to expose the switches. There were two phillips screws to secure the switch plate to the electrical box. Took those off to access the switch.
5. Made a quick sketch of the electrical connections.
6. Removed the damaged switch and the electrical connections.
7. Connected electrical wires to new switch and installed new switch.
8. Took the opportunity to thoroughly clean the glass cover plate and gaskets.
9. Screwed the switch plate back onto the electrical box.
10. Put back glass plate and reinserted the knob gaskets.
11. Put back the lock nuts. Used fingers to tighten then used pliers to give it another quarter turn, making sure not to over tighten.
12. Replaced knobs.
13. Plugged in stove and tested.
Start to finish, it took about 15-20 minutes (mostly due to the cleaning).
Read less
Parts Used:
-
Jack from Steamboat Springs, CO
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers
21 of 23 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
smelly vent filter
-
Russell from Colleyville, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
5 of 8 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
stove downdraft filter coming apart from cleaning
-
eugene from pensacola, FL
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
3 of 6 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!