Models > JP256WL1WW

JP256WL1WW General Electric Cooktop - Overview

Get Parts and Repair Help for JP256WL1WW

If you know the cooktop repair part you need, you can browse the list of all parts on the JP256WL1WW, or you can search by name or part description. You can also find your part by where it is located on the JP256WL1WW by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your cooktop. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the JP256WL1WW [Viewing 1 of 1]

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$4.70

Infinite Switch Knob

Sold individually. This knob accepts a double-flat shaft.

$49.55

Dual Burner Control Switch

This switch controls the dual burner.

$259.05

"HALIANT ELEMENT 9"" "

$141.16

"BURNER 6 "" "

$2.14

"SCREW # 8 -18 X 3 / 8""

$47.41

SWITCH CONTROL

$6.41

STUD

$499.30

ASSEMBLY GLASS TOP WH

$86.07

WIRE HARNESS CONDUIT

$50.82

CHASSIS

Common Symptoms of the JP256WL1WW [Viewing 1 of 1]

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

No control of right front burner (dual burner)

  • Customer: Jeff from Clinton IA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers, Wrench(Adjustable)
  • 7 of 9 people found this instruction helpful
The burner would work but you could not regulate the heat. I ordered and replaced the control switch for that burner. The part was like for like and reasonably priced compared to other websites and dealer. The picture showed that it was identical. I ordered one day and it was here the next. I had drawn a diagram of where the wires went on the old switch so i... read more

The burner light was on - burner control spun freely

  • Customer: Richard from Indianapolis IN
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers, Screw drivers, Wrench(Adjustable)
  • 7 of 15 people found this instruction helpful
Looked up the part, ordered it, and it was there in 3 days. It was slightly different than the old control, but a very well-written set of instuctions detailed which wires to move to which terminal. The entire repair took about 30 minutes, including moving the range out, replacing the control, and push the range back in place. Works perfectly. read more

Rotary switch for the dual control burner failed

  • Customer: Robert from Belvidere NJ
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers, Socket set
  • 4 of 6 people found this instruction helpful
Removed range from cabinets then approximately 6 sheet metal screws from the front of the range and two 1/4" sheet metal screws from the side to remove the front and top of the range. Lifted the cook top removed the two screws from the rotary switch and followed the directions included with switch to connect the wires. In reverse order reassembeled the ran... read more