Quick Question!

Have you ever purchased from PartSelect.com before?

Models > JMW8530DAS

JMW8530DAS Jenn-Air Microwave Oven Combo - Overview

Get Parts and Repair Help for JMW8530DAS

If you know the microwave oven combo repair part you need, you can browse the list of all parts on the JMW8530DAS, or you can search by name or part description. You can also find your part by where it is located on the JMW8530DAS by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your microwave oven combo. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$66.33

Inner Door Glass Pane

Glass only.

$5.15

Insulation

This strip of insulation is located within the oven door.

$4.47

Screw

This screw is sold individually.

Bottom Trim - Black

Exterior Glass Door

This is the outer portion of your door assembly - not the complete door.

$8.10

SPRING- DO

SCREW

SUPPORT- B

$26.88

FRAME- GLA

GUIDE, COOKING (TRILINGUAL)

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Oven Door Inner Glass Broken

  • Customer: Shariq from West Conshohocken, PA
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers
  • 35 of 36 people found this instruction helpful
This is fairly easy for anyone to do. First I opened up the front (silver part) of the oven door by removing the screws at the top and the bottom. Then I kept on removing the various layers of glass... the 2 outside ones are removed by removing their respective screws and then you get to the inner-most. These 2 inner ones are in a frame that holds them t... read more

Oven rack lost in a garage fire

  • Customer: Bob from Saint Clair Shores, MI
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 24 of 30 people found this instruction helpful
First I opened the door to the oven. Then I opened the box that the part came in. (knife) I then slid the oven rack out of the box and unwrapped the plastic, being careful not to bend or scratch the new rack. Now, this is the tricky part... I had to move the existing rack down one space to make room for the new one. Then carefully slid the new rack in, ... read more

Burned terminal block and filter board

  • Customer: Joseph from Decatur, GA
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers, Socket set, Wrench set
  • 55 of 126 people found this instruction helpful
Removed and replaced above named parts, rewired.Be sure to tighten all nuts that secure wires. I believe this is what caused the problem. read more