Quick Question!

Have you ever purchased from PartSelect.com before?

Models > JMW8530DAQ

JMW8530DAQ Jenn-Air Microwave Oven Combo - Overview

Get Parts and Repair Help for JMW8530DAQ

If you know the microwave oven combo repair part you need, you can browse the list of all parts on the JMW8530DAQ, or you can search by name or part description. You can also find your part by where it is located on the JMW8530DAQ by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your microwave oven combo. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$5.15

Screw

This screw is sold individually.

$46.78

Oven Rack

Used in the lower oven. Sold individually.

$5.10

Screw, 8/18 x 3/8

This screw is sold individually.

$39.40

Door Hinge - Left or Right Side

As per the manufacturer, when replacing the hinge, they recommend to also replace the hinge receptical also knows as the bracket. See related parts.

$65.38

Inner Door Glass Pane

Glass only.

$19.77

Terminal Block

It provides a way of connecting individual electrical wires and offers protection of the device from electrical surges (voltages and/or currents).

$24.58

LMP-BASLES

This small halogen light bulb is located inside the oven cavity.

$2.76

Screw

$25.40

Hinge Bracket - Left or Right Side

$25.88

Insulation

This strip of insulation is located within the oven door.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Oven Door Inner Glass Broken

  • Customer: Shariq from West Conshohocken, PA
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers
  • 35 of 36 people found this instruction helpful
This is fairly easy for anyone to do. First I opened up the front (silver part) of the oven door by removing the screws at the top and the bottom. Then I kept on removing the various layers of glass... the 2 outside ones are removed by removing their respective screws and then you get to the inner-most. These 2 inner ones are in a frame that holds them t... read more

Burned terminal block and filter board

  • Customer: Joseph from Decatur, GA
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers, Socket set, Wrench set
  • 66 of 145 people found this instruction helpful
Removed and replaced above named parts, rewired.Be sure to tighten all nuts that secure wires. I believe this is what caused the problem. read more

Oven rack lost in a garage fire

  • Customer: Bob from Saint Clair Shores, MI
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 25 of 31 people found this instruction helpful
First I opened the door to the oven. Then I opened the box that the part came in. (knife) I then slid the oven rack out of the box and unwrapped the plastic, being careful not to bend or scratch the new rack. Now, this is the tricky part... I had to move the existing rack down one space to make room for the new one. Then carefully slid the new rack in, ... read more