Models > JMV8196ACQ

JMV8196ACQ Jenn-Air Microwave - Overview

Get Parts and Repair Help for JMV8196ACQ

If you know the microwave repair part you need, you can browse the list of all parts on the JMV8196ACQ, or you can search by name or part description. You can also find your part by where it is located on the JMV8196ACQ by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your microwave. We’ve also included any installation videos we have for JMV8196ACQ parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$3.46

Light Bulb - 40W

Sold Individually.

$2.70

SCREW

$6.58

Bulb - 120v 25w

$4.46

Light Cover - Clear

Note: As per the manufacture the original cover was made with one hole, the part is now made with three holes.

$16.19

Grease Filter

$37.08

Cooking Tray

$10.94

Circular Turntable Support with Wheels

$10.00

Charcoal Filter

$44.27

Door Interlock Switch Kit

This kit contains 2 switches - 15 Amp - 125/250 Volt with 3/16" terminals.

$2.70

Wave Guide Rivet

This rivet is used for the stirrer cover/wave guide. They are sold individually.

Common Symptoms of the JMV8196ACQ [Viewing 1 of 36]

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Microwave worked intermittently depending on how door was closed

  • Customer: Robert from Bainbridge Island WA
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Pliers, Screw drivers
  • 27 of 33 people found this instruction helpful
Remove top grille (2 screws), undo control panel (1 screw). Tilt down control panel, switches are on the left. There are actually three switches that are involved with the door, two horizontally mounted, one vertically mounted. This would be an EASY REPAIR, but it took me a while to figure out which of the three switches was bad, and also took a while to ... read more

Burned out light bulbs in microwave hood stove

  • Customer: Herbert from Norton MA
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 10 of 12 people found this instruction helpful
I had some difficulty removing the glass plate because of the awkward (upside down) position of the screw that retained it. After replacing the burned out bulbs and replacig the glass plate the problem of replacing the screw involved my dropping the thing several times before I got the screw threads to catch. I got a screw thread to catch enough to hold th... read more

No Power to Microwave

  • Customer: John from Palos Hills IL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 16 of 31 people found this instruction helpful
After determined the problem on one of the websites...I received the part I needed... removed the control panel and installed the new main fuse In about 15 mins! read more