Quick Question!

Have you ever purchased from PartSelect.com before?

Models > JMV8196AAS

JMV8196AAS Jenn-Air Microwave - Overview

Get Parts and Repair Help for JMV8196AAS

If you know the microwave repair part you need, you can browse the list of all parts on the JMV8196AAS, or you can search by name or part description. You can also find your part by where it is located on the JMV8196AAS by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your microwave. We’ve also included any installation videos we have for JMV8196AAS parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$6.16

Light Bulb - 40W

Sold Individually.

$2.80

SCREW

Sold individually.

$47.13

Door Interlock Switch Kit

This kit contains 2 switches - 15 Amp - 125/250 Volt with 3/16" terminals.

$8.01

Door Latch Spring

$53.20

Adapter - Exhaust

$19.11

Air Damper

Cabinet Screw

This screw is sold individually.

$27.96

Wave Guide Cover

This part guides the waves to the inside of the microwave to cook your food.

$16.42

HARD-MOUNT

This hardware kit is used to mount the microwave.

Electronic Control Board

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Microwave worked intermittently depending on how door was closed

  • Customer: Robert from Bainbridge Island, WA
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Pliers, Screw drivers
  • 49 of 57 people found this instruction helpful
Remove top grille (2 screws), undo control panel (1 screw). Tilt down control panel, switches are on the left. There are actually three switches that are involved with the door, two horizontally mounted, one vertically mounted. This would be an EASY REPAIR, but it took me a while to figure out which of the three switches was bad, and also took a while to ... read more

Burned out light bulbs in microwave hood stove

  • Customer: Herbert from Norton, MA
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 17 of 21 people found this instruction helpful
I had some difficulty removing the glass plate because of the awkward (upside down) position of the screw that retained it. After replacing the burned out bulbs and replacig the glass plate the problem of replacing the screw involved my dropping the thing several times before I got the screw threads to catch. I got a screw thread to catch enough to hold th... read more

Broken tray ring for rotation of dish.

  • Customer: Michael from Sewanee, TN
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers
  • 15 of 16 people found this instruction helpful
Used needle nose to pull off piece of old ring. Layed in new one. read more