Models > JMV8196AAQ

JMV8196AAQ Jenn-Air Microwave - Overview

Get Parts and Repair Help for JMV8196AAQ

If you know the microwave repair part you need, you can browse the list of all parts on the JMV8196AAQ, or you can search by name or part description. You can also find your part by where it is located on the JMV8196AAQ by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your microwave. We’ve also included any installation videos we have for JMV8196AAQ parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$3.54

Light Bulb - 40W

Sold Individually.

$2.70

SCREW

$15.71

Turntable Roller Guide

This roller is located underneath the glass turntable. With the help of the motor, this roller helps to rotate the glass tray. This part takes the place of the coupling.

$5.71

Bulb - 120v 25w

$13.75

Light Cover - Clear

Note: As per the manufacture the original cover was made with one hole, the part is now made with three holes.

$12.93

Grease Filter

$10.61

Circular Turntable Support with Wheels

$33.91

Cooking Tray

$4.02

Wave Guide Rivet

This rivet is used for the stirrer cover/wave guide. They are sold individually.

$7.93

Single Shelf Holder

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Microwave worked intermittently depending on how door was closed

  • Customer: Robert from Bainbridge Island WA
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Pliers, Screw drivers
  • 34 of 41 people found this instruction helpful
Remove top grille (2 screws), undo control panel (1 screw). Tilt down control panel, switches are on the left. There are actually three switches that are involved with the door, two horizontally mounted, one vertically mounted. This would be an EASY REPAIR, but it took me a while to figure out which of the three switches was bad, and also took a while to ... read more

Broken tray ring for rotation of dish.

  • Customer: Michael from Sewanee TN
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers
  • 14 of 15 people found this instruction helpful
Used needle nose to pull off piece of old ring. Layed in new one. read more

burned out bulb

  • Customer: john from plainfield IL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 13 of 17 people found this instruction helpful
removed two screws,lowered the glass shield,removed the burned out bulb and replaced it with the new one. I ordered the bulb from parts select and recieved it two days later. It was a pleasure to deal with them, and certainly use them again. read more