Quick Question!

Have you ever purchased from PartSelect.com before?

Models > JMV8100AAS

JMV8100AAS Jenn-Air Microwave - Overview

Get Parts and Repair Help for JMV8100AAS

If you know the microwave repair part you need, you can browse the list of all parts on the JMV8100AAS, or you can search by name or part description. You can also find your part by where it is located on the JMV8100AAS by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your microwave. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$2.80

SCREW

Sold individually.

Order within the next 11 hrs and your part ships today!

Air Grille

TURNTABLE

SCREW

$28.53

BLOCK-FUSE

Order within the next 11 hrs and your part ships today!

SWITCH- PR

RECEPTACLE, BULB

WASHER

DAMPER ASY

COVER, CAVITY

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Turntable on Maytag MMV5100AAW Stopped Turning

  • Customer: Tim from Oviedo, FL
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 42 of 43 people found this instruction helpful
Symptom: Turntable stopped turning. Was able to remove the glass tray in the microwave and the little cam that drives the glass tray was barely turning. Control on microwave to turn the turntable on/off was working as evidenced by the cam not turning when I turned off the turntable. When I turned the cam manually, I could feel the motor turn so I knew the... read more

No Power to Microwave

  • Customer: John from Palos Hills, IL
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 27 of 61 people found this instruction helpful
After determined the problem on one of the websites...I received the part I needed... removed the control panel and installed the new main fuse In about 15 mins! read more

turntable motor was bad.

  • Customer: CHARLES from HOLCOMBE, WI
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 5 of 6 people found this instruction helpful
fliped it upside down and took of the panel un screwd the motor and un hooked the wire leads.then revesed the process. read more