Models > JMC7000ADB

JMC7000ADB Jenn-Air Microwave - Overview

Get Parts and Repair Help for JMC7000ADB

If you know the microwave repair part you need, you can browse the list of all parts on the JMC7000ADB, or you can search by name or part description. You can also find your part by where it is located on the JMC7000ADB by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your microwave. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$2.70

SCREW

$3.83

SCREW

$35.54

Turntable Cooking Tray

$3.22

Ceramic Fuse - 20 Amp

This ceramic microwave fuse is white in the center, while each end is made of metal. This is a twenty amp fuse.

$20.38

SWITCH- PR

$2.70

SCREW

$18.91

Diode

This part is also known as a rectifier.

$142.48

Microwave Magnetron

This part is used to generate microwave energy/heat.

$27.87

BULB SOCK

MOTOR, TURNTABLE

Common Symptoms of the JMC7000ADB [Viewing 1 of 29]

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

microwave oven blew fuse

  • Customer: tad from tamarack MN
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 12 of 18 people found this instruction helpful
First I removed upper front grill by removing two Philips head screws on top and pulling off. This exposed the Philips head screw which holds control panel in place. After removing screw I pushed up on panel and it came off to expose fuse. With needle nose pliers I removed old fuse and again with pliers held new fuse in position. With the help of a bladed s... read more

Broken glass plate for microwave

  • Customer: randy from missoula MT
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 8 of 8 people found this instruction helpful
Bought new plate. read more

motor for the turntable was inoperative

  • Customer: john from scottsdale AZ
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers
  • 6 of 9 people found this instruction helpful
Way easy! Took the bottom plate off and replaced the old motor with the new one and turned the microwave on and the turntable was circling. thanks read more