Quick Question!

Have you ever purchased from PartSelect.com before?

Models > JKP27G*J4

JKP27G*J4 General Electric Wall Oven - Overview

Get Parts and Repair Help for JKP27G*J4

If you know the wall oven repair part you need, you can browse the list of all parts on the JKP27G*J4, or you can search by name or part description. You can also find your part by where it is located on the JKP27G*J4 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your wall oven. We’ve also included any installation videos we have for JKP27G*J4 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the JKP27G*J4

[Viewing 3 of 3]
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$3.88

Light Bulb - 40W

This an authentic OEM 40-Watt replacement light bulb, used in a number of household appliances. It is specially designed to withstand extreme temperatures, which is why these repla...

$36.12

Bake Element - 240V

This is a 240 volt bake element for your oven or range. The kit comes with two installation screws and the element. The element functions by supplying heat from the bottom of the oven to bake or cook your food. You may need to replace the bake element if your oven is not heating properly. Each screw gets screwed into each wire terminal with a Phillips screw driver. Hold the wires forward to make sure the wires do not fall back through the rear of the oven. Unplug your appliance or shut off your circuit breaker to the appliance before installing the new part.

$29.86

Bake Element - 240V 2300W

This bake element is meant for your range and is 240 volts and 2300 watts. This closed hinged style element with screw-in terminals measures at 15-1/4 inches long and 18-1/4 inches...

$33.73

Broil Element

The broil element is located at the top of the oven and gives off heat in order to bake evenly. If you notice that the element is not heating up or is not cooking evenly it could be because it is broken or burnt out. The depth of the screw-on terminals is 2-3/4 inches and they are 1-1/4 inches apart. Does not include mounting bracket. All you need for this simple repair is small screwdriver. To complete this repair, you will need to first turn the oven off (or shut off the house circuit breaker), remove the two screws that are holding the old element in place, remove the two wires from the old part, and then connect them to the new part and screw back into place.

$18.43

Broiler Pan - Large

This large broiler pan is found in the bottom of your oven and is used to catch drippings from broiling foods. This part includes the grate and bottom pan and is made of porcelain....

$7.00

Oven Light Socket - With Push In Receptacle

$5.30

Light Cover

This light bulb lens covers the interior light bulb in an oven, range, or stove. No tools are necessary to replace this part. Simply slide off the wire bracket to remove the existi...

$19.19

Broil Element Kit

This element has screw on terminals.

$11.67

Evaporator Fan Blade Kit

$2.10

BAIL

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Replacment of the bake unit

  • Customer: Beth from Matthews, NC
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Socket set
  • 543 of 553 people found this instruction helpful
The hardest part was removing the old nuthead screws off the old bake burner. Once those were off installing the new bake element was simple. One screw in each wire terminal, two hex head screws to hold the unit in place. Works like a charm! read more

element quit working

  • Customer: Wilbur from Taylorville, IL
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 500 of 516 people found this instruction helpful
Unhooked electrical wiring from unit and rehooked new unit to electrical wiring. read more

oven lower burner burned out

  • Customer: james from franklin, TN
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Screw drivers
  • 483 of 563 people found this instruction helpful
Very easy, remove two screws, pull burner unit out slightly, then remove the two screws attaching the wires, one to each side, remove old unit and replace with new unit and replace screws.

Works fine perfect replacement. read more