Models > JJW9827DDS

JJW9827DDS Jenn-Air Oven - Overview

Get Parts and Repair Help for JJW9827DDS

If you know the oven repair part you need, you can browse the list of all parts on the JJW9827DDS, or you can search by name or part description. You can also find your part by where it is located on the JJW9827DDS by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your oven. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$2.70

Screw

This screw is sold individually.

Order within the next 5 hrs and your part ships today!
$20.60

Terminal Block

It provides a way of connecting individual electrical wires and offers protection of the device from electrical surges (voltages and/or currents).

Order within the next 5 hrs and your part ships today!
$10.91

Halogen Light Bulb

This small halogen light bulb is located inside the oven cavity.

Order within the next 5 hrs and your part ships today!
$2.70

Screw

This screw is sold individually.

Order within the next 5 hrs and your part ships today!
$38.20

Oven Rack

Sold individually.

Order within the next 5 hrs and your part ships today!
$28.75

Door Hinge - Left or Right Side

Order within the next 5 hrs and your part ships today!
$67.66

Meat Probe

Also known as Heat Probe or Gauge. This probe is used to check the internal temperature of the meat to ensure proper temperature is reached.

Order within the next 5 hrs and your part ships today!
$24.56

Hinge Bracket - Left or Right Side

Order within the next 5 hrs and your part ships today!
$37.73

Door Gasket

This gasket prevents heat from escaping the oven cavity when in use. It contains all of the attaching clips needed for installation.

Order within the next 5 hrs and your part ships today!
$50.07

Broil Element

This broil element is found on the roof of the oven.

Order within the next 5 hrs and your part ships today!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Burned terminal block and filter board

  • Customer: Joseph from Decatur GA
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers, Socket set, Wrench set
  • 38 of 91 people found this instruction helpful
Removed and replaced above named parts, rewired.Be sure to tighten all nuts that secure wires. I believe this is what caused the problem. read more

Oven door would not close tightly.

  • Customer: Daniel from Rochester Hills MI
  • Difficulty: Really easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 8 of 12 people found this instruction helpful
DOOR HINGE: Lifted the door out of place and layed it on the floor. Removed the six screws (three on top and three on bottom) from the door to remove the front panel exposing the hinges. Removed three screws from each hinge to remove them. Reversed the process to complete. HINGE BRACKET: Would recommend replacing these with hinges. After removing the screws ... read more

Broken Outer Door Assy

  • Customer: Mark from Houston TX
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 4 of 4 people found this instruction helpful
I broke the door by accidentally "bumping" the lower door handle stepping off a ladder while changing light bulbs at mother-in-law's. Yes, I broke my mother-in-laws oven!

Partselect.com saved my bacon and my marriage. The repair is fairly straight forward. The door is opened about halfway to allow access to the clips on the hinges. Once the cl... read more