Models > JGP975SEK2SS > Instructions

JGP975SEK2SS General Electric Range - Instructions

All installation instructions for JGP975SEK2SS parts

These instructions have been submitted by other PartSelect customers and can help guide you through the range repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the JGP975SEK2SS
16-30 of 30
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Burner had uneven flames

  • Customer: Akshay from Bridgeton NJ
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 1 of 3 people found this instruction helpful
Too easy a five year old could do it

Grate foot bdroke off allowing grate to scratch cooktop

  • Customer: John from Tijeras NM
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 1 people found this instruction helpful
Used scribe to remove grate foot plug still in grate inserted new foot.

I had a few broken parts on my cooktop

  • Customer: Shelley from Wolfeboro NH
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 1 people found this instruction helpful
Ordered the parts online. They came in just a few days and all 3 repairs took me less than 10 minutes!

COULD NOT REMOVE ORIFICE

  • Customer: Jim from Macedon NY
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Wrench set
  • 0 of 1 people found this instruction helpful
I had to convert unit to propane and it was new out of the box. Could not remove one orifice because it had been installed too tight so I called GE for service as a warantee call we were on the phone with GE Customer Service for well over an hour and were transferred about 5 times all resulting in dropped calls. So, I contacted Parts Select and of course, paid for the part myself just get it done. It was easier that trying to work with GE. Received the part and and completed the conversion without difficulty. Along with the range top, we completely outfitted our remodeled kitchen with Profile appliances including 2 ovens, dishwasher, refrigerator and a trash compactor. However, Parts Select was great.

The Grate foot is to big for the hole.

  • Customer: Harold from Broadalbin NY
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required:
  • 0 of 1 people found this instruction helpful
I had to drill the hole to a larger size to enable the foot to fit.

The Grate Foot was deteriorated on several sections for my cook top. The hardest part was finding the right part.

  • Customer: Chelagh from Fredericksburg VA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 2 people found this instruction helpful
Nothing technical.

Leaking from front door

  • Customer: Gene from Simi Valley CA
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Screw drivers
  • 1 of 7 people found this instruction helpful
First remove the screws around the inside perimeter of the door. These require a special hex driver. Take off the inside plastic liner of door.
Peal off the old Insulation Foam Strip and replace it with the new strip in the same location. Make sure the wires are off to the right side. Replace the door plastic liner. Done. The Insulation Foam Strip really acts more like a loose gasket to keep spashing from creeping under the door and drippin out on the floor.

Missing grate foot.

  • Customer: Barbara J from Sweetwater TX
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers
  • 0 of 0 people found this instruction helpful
Ordered by phone parts & very pleased with all of transaction.

Both items needed to replace broken or non existent ones

  • Customer: Joan from Warren NJ
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
The burner cap was a no brainer. The grate feet should have been also, but many of them were undersized so we had to maneuver them in such a way that they didn't fall out of the grates.

Large burner wasn't lighting very quickly

  • Customer: Jesse from Nashville TN
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Removed grill grates, gas distributors, etc. (just lift off). Used star screwdriver to remove screws (3 per burner for SML, 2 for power burner). Lift off stainless cover, which also lifts off the white sparkers I was replacing. Pull them off the wires (didn't need pliers, others said they did). Replace (make sure it is all the way on) and reverse your steps. White sparkers electrodes seemed loose when I put them back on, but tightened up when I fully secured the top back on. Make sure the wires aren't pinched underneath when you put the top back on. Recommended: If you've got one that isn't working, go ahead and replace all 3 (power burner is different) because the part is so cheap you may as well just do it now.

carbonized burners

  • Customer: Stephen from North Las Vegas NV
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Replaced all four

the grate foots came off

  • Customer: Sandra from Watertown MA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
put it in but it keeps falling out. they're made narrower than my oven grate.

Replace medium burner for gas cooktop

  • Customer: Charles from Houston TX
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Very easy to remove grates, burner cover and remove old burner head. Very simple process, but surprised that there was no efficient way to clean carbon deposits from my old burner. Burner video instructions on line insured I installed the new burner head correctly (actually, pretty hard to get wrong), and burner worked correctly immediately. Will likely replace other burners in time as the new one is so "silvery" colored compared to my other burners.

Burner would not ignite.

  • Customer: John from Los Angeles CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Could not have been simpler. Burner head dropped into place and was held in place by gravity. Not possible for part to go in incorrectly.

Grate Foot have 8 for my stove and one breaks every now and then

  • Customer: Lee from Kenner LA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
This was and always will be an easy fix, all I have to do is get my Ice Pick and pick the broken rubber part stuck in the hole if it does not break clean and fall out. Not much more I can say about this simple problem.
All Instructions for the JGP975SEK2SS
16-30 of 30