Models > JGP636BEV3BB

JGP636BEV3BB General Electric Range - Overview

Get Parts and Repair Help for JGP636BEV3BB

If you know the range repair part you need, you can browse the list of all parts on the JGP636BEV3BB, or you can search by name or part description. You can also find your part by where it is located on the JGP636BEV3BB by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the JGP636BEV3BB [Viewing 2 of 2]

$1.70

Screw

This screw is sold individually.

$23.27

Surface Burner Spark Electrode

This part helps your burner ignite and produce flame.

$12.82

Burner Bowl Seal

$11.54

Burner Bowl - Large

This black drip bowl is sold individually.

$5.55

Single Liquid Propane Orifice Spud - Medium Burner

Sold Individually. Order quantity needed.

$1.27

SCREW

$11.95

Burner Bowl - Medium

$64.07

Burner Grate

Sold individually.

$26.89

Gas Pressure Regulator

This comes set from the manufacturer for Natural Gas. It also includes the conversion to Liquid Propane. This valve automatically cuts off the flow of gas at a certain pressure.

$6.24

Natural Gas Orifice Spud

This orifice spud changes the burner from liquid propane to natural gas. This orifice is sold individually. Size: 1.07mm

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Burner igniter needed to be replaced

  • Customer: Thomas from Bloomsbury NJ
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 18 of 33 people found this instruction helpful
Assumed the entire top of the range would have to be lifted off. Removed the three screws inside the top of the over door and then noticed the two screws holding the dish around the burner. They were tight and required WD-40 and then a sharp tap and came off.
Important: Notice the direction your old igniter is plugged into the wire. It is not clea... read more

My wife wanted different color stove top grate & burner caps.

  • Customer: Michael from Bakersfield CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 7 of 8 people found this instruction helpful
Called GE for part number crossover from gray to black and asked for an email quote. Called Parts Select for pricing, which was alot lower! Shipping took five days and less then $8.00 buck....now mama's happy!!!! Thanks for great frendly service from Mike in California. read more

Replacement cook-top, had natural gas orifices, needed propane

  • Customer: Aloha from Monterey LA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 7 of 12 people found this instruction helpful
Three were simple screw out and replace with a nut driver. The warming burner had a smaller opeining which was too large for the nut driver. Had to remove shielding aroound it first. Simple, job. My mother did the last one. read more