This burner grate foot, also known as a bumper, is an authentic OEM replacement part for your range. It is a small black rubber component that acts as a buffer between the metal grate and the surface ...
This burner cap is for your gas range, and acts as a cover for the burner head. It is black in color and just over 3 inches in diameter. If your old burner cap is damaged or missing, this is the part ...
This is a replacement burner cap for your gas range or cooktop. The burner cap is found on the burner head, and prevents debris from getting into the head when it is not in use. The cap is black in co...
This burner knob, also referred to as a control knob, is a genuine OEM replacement part that is designed for cooktops. It is grey in color and made of highly durable plastic. The knob allows you to co...
This economic nut is a manufacturer-approved replacement part for your oven range. The nut can become worn down or stripped over time and need replacing. Make sure to disconnect power to the unit and ...
$8.06
In Stock
Questions And Answers for JGP5036SL1SS
Ask our experts a question about this model and we'll get back to you as soon as possible!
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Wendy
August 17, 2023
I need a kit to convert from natural gas to LP
For model number JGP5036SL1SS
Hi Wendy, thank you for your inquiry. The compatible LP conversion kit for your model is part number PS12342340. We hope this is what you were looking for!
Hello Aviva, thank you for reaching out. The grate on the left hand is part number PS12296279, the grate on the right hand is part number PS12296278, and the center grate is part number PS12299313. If you need help placing an order, customer service is open 7 days a week!
Hello Melissa, Thank you for writing. You can convert the Appliance to LP with the LP conversion Kit, PartSelect Number PS12342340. We hope this helps!
New burner cap replaced old; just placed over burner; no tools required.
One suggestion: burner cap should have been shipped with thicker bubble protection (easy to do). It was minimally wrapped and placed in a thin, bubble envelope, risking damage in shipping process. Luckily, the burner arrived in tact and usable.
The following are steps in replacing a burner electrode for GE Profile Cook Top Model PGP7030DL1BB 1. Shut off gas and unplug electrical plug 2. Remove all stove grates and turn on knobs 3. Remove all burner covers 4. Remove all screws [three for each burner] 5. Remove two screws near front by removing rubber gra
... Read morete grommets 6. Carefully Lift off stove cover and set aside 7. Remove shield near back of stove top. This exposes all burner wires 8. Remove electrode to burner which does not lite by sliding out clip at bottom of electrode—note color code of wire and replace with same. Change one electrode at a time to insure wire color code is correct. 9. Reassemble in reverse order of steps 1-8