Quick Question!

Have you ever purchased from PartSelect.com before?

Models > JGD8345ADB

JGD8345ADB Jenn-Air Cooktop - Overview

Get Parts and Repair Help for JGD8345ADB

If you know the cooktop repair part you need, you can browse the list of all parts on the JGD8345ADB, or you can search by name or part description. You can also find your part by where it is located on the JGD8345ADB by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your cooktop. We’ve also included any installation videos we have for JGD8345ADB parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$16.43

Top Burner Igniter

This top burner igniter comes with a mounting bracket.

$100.06

Spark Module

This part sends enough current to the igniter to create a spark to the bottom of the burner cap.

$90.21

Grill Grate

This grill grate is sold individually.

$4.94

Burner Mounting Screw

This burner mounting screw is used for mounting burners of some ranges. It also comes with a thin black spacer made of hard plastic.

$62.73

Fan Relay Switch

$11.48

Valve Knob - Black

Sold individually. This knob accepts a D-shaped shaft.

$111.15

Pressure Regulator

A pressure regulator is a valve that will cut off the flow of liquid or gas when it reaches a certain pressure.

$104.63

MANIFOLD

$21.28

Heat Shield

$113.22

Fan Switch - Black

This may look different than the original, but is a functional equivalent.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

replaced filter

  • Customer: ELOISE from MILFORD, OH
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 468 of 475 people found this instruction helpful
pulled old one out , cleaned the area & replaced with the new one. read more

Old grease filter that I actually did not know I had to change

  • Customer: deborah from fort pierce, FL
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 441 of 521 people found this instruction helpful
Removed the old grease screen and cleaned the entire area thoroughly and replaced the screen read more

gas burner ignitor failure

  • Customer: roy from East Providence, RI
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 97 of 110 people found this instruction helpful
Lift out sealed burner assembly rear of stove first while careully sliding to rear to disengage ignitor probes.Remove philips head screws from bottom sheet metal housing to expose bottom of burners Remove gas tube assembly screws and move tube away carefully.Unplug wires from ignitor.Remove screws for ignitor .Remove ignitor, I noticed that rust and dirt ha... read more