Quick Question!

Have you ever purchased from PartSelect.com before?

Models > JGD8130ADW

JGD8130ADW Jenn-Air Cooktop - Overview

Get Parts and Repair Help for JGD8130ADW

If you know the cooktop repair part you need, you can browse the list of all parts on the JGD8130ADW, or you can search by name or part description. You can also find your part by where it is located on the JGD8130ADW by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your cooktop. We’ve also included any installation videos we have for JGD8130ADW parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$14.17

Grease Filter

This grease filter is almost fourteen inches long and almost twelve inches wide. This filter is intended for use with some downdraft cooktops and ranges.

$16.91

Top Burner Igniter

This top burner igniter comes with a mounting bracket.

$5.15

Screw

This screw is sold individually.

$5.10

Screw, 8/18 x 3/8

This screw is sold individually.

$41.17

Spark Igniter Set

This part provides the spark to the burners.

$7.44

Bumper Pad Set of 4

***NOTE: This part has been substituted by the manufacturer and may not appear the same as the original but should function the same. These pads go on the bottom of your gas cooktop grates to prevent them from moving and scratching the top of your appliance.

$4.63

Brass Seal

$37.58

Burner Head

$91.67

Grill Grate

This grill grate is sold individually.

$4.90

Burner Mounting Screw

This burner mounting screw is used for mounting burners of some ranges. It also comes with a thin black spacer made of hard plastic.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

replaced filter

  • Customer: ELOISE from MILFORD, OH
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 469 of 477 people found this instruction helpful
pulled old one out , cleaned the area & replaced with the new one. read more

Old grease filter that I actually did not know I had to change

  • Customer: deborah from fort pierce, FL
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 443 of 523 people found this instruction helpful
Removed the old grease screen and cleaned the entire area thoroughly and replaced the screen read more

gas burner ignitor failure

  • Customer: roy from East Providence, RI
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 102 of 115 people found this instruction helpful
Lift out sealed burner assembly rear of stove first while careully sliding to rear to disengage ignitor probes.Remove philips head screws from bottom sheet metal housing to expose bottom of burners Remove gas tube assembly screws and move tube away carefully.Unplug wires from ignitor.Remove screws for ignitor .Remove ignitor, I noticed that rust and dirt ha... read more