Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
Below is a list of all parts for the Jenn-Air Cooktop JGD8130ADS. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.
The function of the grease filter is to trap grease into the filter from the exhaust air. The grease filter is intended to be used with certain downdraft cooktops and ranges. This ...
This is a surface burner igniter, also known as a top burner ignitor and stove top spark electrode. It is used to generate the spark that lights the surface burner. If your stove will not start, element does not heat, or gas igniter glows but does not light, replacing the igniter can solve these issues. For this installation, you will need a Phillips screwdriver and needle nose pliers. First place the grate on top of the burner, then lift the burner and disconnect the wires. Next remove the two Phillips screws from the bottom of burner, pull igniter out of the burner and wiggle in the new one. Refer to the installation instructions provided by the manufacturer for more instructions.
This screw is sold individually.
***NOTE: This part has been substituted by the manufacturer and may not appear the same as the original but should function the same.
These pads go on the bottom of your gas cooktop grates to prevent them from moving and scratching the top of your appliance.
The spark igniter is sold separately.
This part provides the spark to the burners.
Sold individually. This knob accepts a D-shaped shaft.
This grill grate is sold individually.
This part sends enough current to the igniter to create a spark to the bottom of the burner cap.
Used to provide heat/flame for the grill side of your appliance.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.