Models
>
JGCP436WP00
JGCP436WP00 Jenn-Air Cooktop - Overview
Sections of the JGCP436WP00
[Viewing 3 of 3]
Keep searches simple, eg. "belt" or "pump".
Screw, 8/18 x 3/8
PartSelect #: PS11746840
Manufacturer #: WP90767
This screw is sold individually.
$5.42
In Stock
Grate Feet - Kit of 4
PartSelect #: PS2330208
Manufacturer #: W10185266
This kit contains 4 grate feet for a range. These are the feet to fit your burner grates so the burner will not scratch your cooktop. The are black in color and made of rubber. These feet are fitted w...
$7.88
In Stock
Palnut
PartSelect #: PS2365913
Manufacturer #: 7103P166-60
This palnut is designed for use in cooktops, ranges, wall ovens, dehumidifiers, and range hoods. The palnut is screwed onto a bolt on top of an ordinary nut, and locks the nut in place when the nut is...
$16.17
In Stock
Screw
PartSelect #: PS11744049
Manufacturer #: WP74003976
This screw is sold individually.
$5.36
In Stock
GRATE-BRNR
PartSelect #: PS12717468
Manufacturer #: W11344501
NOTE: As per manufacturer this part no longer includes the grate feet and they must be ordered separately.
$109.33
In Stock
Regulator
PartSelect #: PS11747235
Manufacturer #: WP9759091
This part makes sure that no gas is released until the igniter gets enough power to ignite the gas range and automatically cuts off the flow of gas at a certain pressure.
$175.15
In Stock
Burner Cap - Left Rear - Black
PartSelect #: PS11745755
Manufacturer #: WP8286816
Sold individually.
$64.62
In Stock
Zip Tie
PartSelect #: PS11753208
Manufacturer #: WPW10339879
A zip tie, also known as a cable tie or a wire tie, is a fastening device that holds wires or tubing together. If a machine has wires or tubing that are easily shifted, you need to hold them tightly t...
$8.04
In Stock
Surface Ignitor
PartSelect #: PS11751107
Manufacturer #: WPW10250406
ELECTRODE (LF & RF) (DUAL)
$23.94
In Stock
Questions And Answers for JGCP436WP00
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
replace pads or feet on steel grate of gas stove
pull old ones out of legs. need to glue new ones in, they fit too loose. Some kits contain glue. get some high temp head gasket cement. a drop on each one is plenty. I used some old porcelain glue and hope it will hold. the pads are 2 bucks each plus shipping so don't let them get away!!!
Parts Used:
-
RICHARD from BROKEN ARROW, OK
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
4 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!