Quick Question!

Have you ever purchased from PartSelect.com before?

Models > JGC7430ADS

JGC7430ADS Jenn-Air Cooktop - Overview

Get Parts and Repair Help for JGC7430ADS

If you know the cooktop repair part you need, you can browse the list of all parts on the JGC7430ADS, or you can search by name or part description. You can also find your part by where it is located on the JGC7430ADS by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your cooktop. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the JGC7430ADS

[Viewing 3 of 3]
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$111.15

Pressure Regulator

A pressure regulator is a valve that will cut off the flow of liquid or gas when it reaches a certain pressure.

Order within the next 46 mins and your part ships today!
$25.93

BURNER- BA

Order within the next 46 mins and your part ships today!

Holder with Orifice -12K

Burner Foam Tape

$4.94

ORIFICE- L

Order within the next 46 mins and your part ships today!

CAP- BURNE

GUIDE, COOKING (TRILINGUAL)

HOLDER W O

NAT-LP ORI

SUPPORT- C

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Burners kept clicking after ignited

  • Customer: Robert from Ranchos de Taos, NM
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 24 of 36 people found this instruction helpful
After I bought this part, installed it and the clicking still did not stop I finally found the problem. If your ignitor can still click then it's still good. The problem is the electric connection between the head burners and the base burners (Top Assembly diagram). Put a little weight on the head burner while grabbing it with your hand and grind it into the... read more

stove top gas burner ignitor only flicks but does not light burner

  • Customer: Marlene from Dana Point, CA
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers
  • 9 of 12 people found this instruction helpful
If you have a burner that begins to constantly flick without lighting, and/or flicks while you are lighting another burner, it is likely time to order a new ignitor. Once received, we first lifted the burner support rack, then the burner cap, then unscrewed the nut holding the metal bracket that holds the ignitor in place (years ago we had to "soak" the nut... read more

Conversion back to natural gas From propane

  • Customer: Robert from Mullica Hill, NJ
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Wrench set
  • 3 of 6 people found this instruction helpful
I converted the cooktop from propane to natural gas, the parts I was told I needed were the incorrect parts. I called because I was not sure about the listed parts. I was helped over the phone but recieved the LP parts. The flame was very low, and i found the orifices I replaced were the same parts I just took out.I contacted Parts select and they were hel... read more