Quick Question!

Have you ever purchased from PartSelect.com before?

Models > JGB918SEL3SS > Parts

JGB918SEL3SS General Electric Range - Parts

All parts for the General Electric Range JGB918SEL3SS

Below is a list of all parts for the General Electric Range JGB918SEL3SS - Gas. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the JGB918SEL3SS
1-14 of 236
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$3.80

Light Bulb - 40W

This an authentic OEM 40-Watt replacement light bulb, used in a number of household appliances. It is specially designed to withstand extreme temperatures, which is why these repla...

$44.17

Flat Style Oven Igniter Kit

The flat style oven igniter kit comes with a mounting bracket and a wire connector with a plug. The igniter kit is used to heat your oven. If you notice that your oven will not heat up properly, the igniter kit may need to be replaced. This flat style gas oven igniter has a body length of 3-3/4 inches. When completing this repair, the connector plug might need to be removed and spliced to the range wiring using porcelain wire nuts. Before you begin this repair, be sure to disconnect the power source from the oven, and shut off the gas supply.

$32.04

Surface Burner Knob - Stainless

Sold individually. This knob accepts a D-shaped shaft.

$6.15

Top Burner Spark Electrode

The top burner spark electrode, also known as a range surface burner igniter, is designed for use in your gas range. The function of this part is to provide the spark that lights the surface burner. If your gas range will not start, or if the igniter glows but will not light, you may need to replace the top burner spark electrode. This part is sold individually. This product is white in color and measures approximately 1-1/2-inches in length by 1/2-inch in width. Be sure to disconnect the gas supply to the range before you begin this repair. This is an OEM part sourced directly from the manufacturer.

$2.75

Grate Bumper - Black

Sold individually.

$45.18

Oven Rack

The oven rack is sold individually. It is chrome in color and measures approximately 24 inches wide by 17-1/2 inches deep. The rack is used to hold cookware in the oven and slides back and forth for easy access. Racks can become rough and discolored over time and may need to be replaced, or perhaps you just need extra storage space in the oven! This repair is extremely simple and does not require any tools. Before you begin, ensure that the rack edges are straight and have not warped from shipment. Once the oven door is open, the stop end goes in first and it simply slides into place.

$9.99

Burner Cap

$9.76

Burner Cap

$5.94

Burner Cap - 5000 btu

$20.64

Burner Head - Medium - 9500

This burner head, or surface burner, is used in ranges and ovens. The burner sends gas through the holes and slots to create an equal flame across the cooking area. If the gas igniter glows but will not light up, or there are heating inconsistencies, replacing the burner head could be the solution to your problem. No tools are required for this installation. To change the burner, first lift the grate and take the burner cap off. Next, lift the burner away from the cooktop. To set the new burner in place correctly, check the locating tab that fits into the V-shaped notch and make sure the igniter fits into the cut-out. Refer to the diagram provided by the manufacturer for further instructions.

$14.60

Burner Cap

$14.19

Small Burner - 5K

Sold individually.

$34.04

Thermostat Knob - Stainless

Sold individually. This knob accepts a D-shaped shaft.

$7.19

Foot - Leveller

Sold individually.

All Parts for the JGB918SEL3SS
1-14 of 236