This 40-Watt light bulb is sold individually and is a genuine OEM replacement option for your home appliances. It is specially designed to withstand extreme temperatures, so this bulb is compatible wi...
This burner cap is for your gas range, and acts as a cover for the burner head. It is black in color and just over 3 inches in diameter. If your old burner cap is damaged or missing, this is the part ...
This is a burner cap for your gas range. The cap acts as a cover for the burner head. If your old burner cap is damaged or missing, this is the part that will replace it. The cap is black in color and...
This is a replacement burner cap for your gas range or cooktop. The burner cap is found on the burner head, and prevents debris from getting into the head when it is not in use. The cap is black in co...
This part is the replacement light socket for your oven. The oven light socket provides power to the light, and at the same time holds the light bulb in place.
Ask our experts a question about this model and we'll get back to you as soon as possible!
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Scheagbe
November 16, 2022
How do I set the self cleaning feature on my syove?
For model number JGB700SEJ4SS
Hi Scheagbe, thank you for the question. To use the Self Clean feature:
1. Start with the oven at room temperature.
2. Wipe excess grease and soil from the oven and interior door.
3. Remove all items. See Cleaning the Cooktop to determine if your grates may be self-cleaned and for important details regarding grate placement.
4. Close the door. Slide the door latch handle to the left as far as it will go.
5. Click the Clean Self/Steam button.
You cannot open the door during the self-clean cycle.
The door will remain locked after the self-clean cycle until the oven cools below the unlocking temperature.
At the end of the self-clean cycle, allow the oven to cool and wipe any ash out of the oven.
We hope this information helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Katherine
April 19, 2023
Is there a cast iron griddle for this model?
For model number JGB700SEJ4SS
Hello Katherine, thank you for reaching out. According to our research, your model comes with an aluminum griddle, part number PS11725207. We hope this information is useful!
The panel keeps going out on this model, is that common? Do I have to replace the control panel?
For model number JGB700SEJ4SS
Hi Linda, thank you for reaching out. Based on our understanding of the issue, we would suggest you check the control board, part number PS12296746, as it is the most likely cause of this issue. If it is faulty, you may need to replace it. We hope this solves your problem!
The igniter/clicker won't stop clicking even when the knob is on OFF position. What seems to be the problem?
For model number JGB700SEJ4SS
Hello Marte, thank you for contacting us. Based on our understanding of the issue, we would suggest checking the spark ignition switch and harness, part number PS12702961, to solve the problem. We hope that helps!
I had to call for a appointment for repair with GE Appliance because I thought then it . .was something electrical. The technician came out & checked everything out, turned out it was not electrical, The technician went out to his truck got a light bulb from his truck, put it in & it worked. It cost me $121.00 for trip charge from GE appl
... Read moreiance for a light bulb that worked, your light bulbs were defective twice. Very disappointed with your products, cost me alot of money for a good light bulb thru GE appliance
Unplugged the appliance for safety. Removed two 1/4" screws that held the assembly in place. Carefully removed the wire guard that retains the glass shield. Unscrewed old light bulb and replaced with new part. Reversed the steps after cleaning glass cover.
the flame spreader through the years, developed a hole above the glow coil causing the above trapped gas between the oven pan and spreader to ignite. by replacing the flame spreader the problem is gone and is now working properly. thank you, parts select for being there when i needed the part and also being reasonably priced. mike marino