JFD2589KES Jenn-Air Refrigerator - Instructions

Found Parts Select while searching for parts to fix symptom. Other's experience and video to replace the ice maker was of great help. I had done this repair on my Motor Home before so knew I should be able to do it on the home appliance. Followed the video and fixed it in short time considering I work very deliberatly on such things.

I started by removing the ice tray. I unscrewed the three screws holding the ice maker.I positioned the icemaker to the point I could insert a screwdriver into the space that releases the power clip and pushed and nudged the power clip out. I then pulled out the broken icemaker and replugged the new one in. I then put the icemaker back in the position it was originally in and replaced the screws. Getting the clip out was the trickiest thing about it. You have to position it where you can see the clip. All in all it was a simple fix. The icemaker started making ice not to long after that. I did this while leaving the refrigerator on. I think they suggest unplugging it. It was not that hard to do. I saved sixty five dollars on labor and another thirty five dollars on the unit by not using the appliance repair company.

Remove old and replace with new.

The repair was very easy. I only had to undo the harness from the refrigerator and remove three screws to take out the ice maker. After removing the part I simply removed the other end of the harness from the old ice make and attached it to the new one and replaced the new ice maker by plugging the harness back into the refrigerator and then replacing the three screws. In about 2 hours I had ice!!!

I found a video on You Tube that showed how to do it. Only had to remove 1 screw! The most difficult part was getting the ice out of the freezer and feed tube. I turned off the unit, went for errands and let nature take its course. I put a tray down in front of the freezer but my floor still got a good mop.

As per directions

Was able see the part needed to be replaced from the pictures provided on the site. Part came in a few days. removed the old part and installed the parts in about 20 minutes

Very quick, three screws and it came out Took rack off old piece and added it to the new part. Screwed back on 5 minutes. 3 years with broken hinge and 5minutes to replace. The parts shipped quick had it two days from purchase. I will use this for future appliance repair.

All I had to do was remove three screws. Took a few minutes to figure out the arm that controls the air flow into the deli section but that was not difficult, and I replaced the piece and put the screws back in. Done! Beats the heck out of having someone from the company where I bought it come out, then go order the part, then come back out to install it. I figure I saved at least $100. Takes NO great talent.

Took of slider for drawer and put them on new part. Unscrewed three screws, took of old part and put on new part and screwed on. If I can do it anyone can.

Replaced the ice making assembly and all works fine now. PS2121513 Ice Maker Assembly

Removed pantry and glass shelves. Remove three small screws. Pop out end cap and remove drawer rail(two phillips screws). Reinstall on new end cap and place back in refer with three screws. Reinstall glass shelves and pantry. Job complete!!!

Took all the shelves and drawers off above part to be replaced and cleaned them. Removed old part and replaced with new.May I add new part fit perfectly!. No major problems encountered. Tip: remember where all parts were removed from!

really easy it took less than 15 minutes, it took more time to clean out the refer. than to do the repair.

Remove drawers. Remove 1/4 screws. Remove end cap. The linkage for temp control is very fragile so be very careful. Not a very dificult task at all.