Models
>
JES0736SM1SS
JES0736SM1SS General Electric Microwave - Overview
Sections of the JES0736SM1SS
[Viewing 1 of 1]
Manuals & Care Guides for JES0736SM1SS
Click to downloadKeep searches simple, eg. "belt" or "pump".
Glass Cooking Tray
PartSelect #: PS249961
Manufacturer #: WB49X10010
This tray rotates in your microwave ensuring more even temperatures.
No Longer Available
Questions And Answers for JES0736SM1SS
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Sort by:
- < Prev
- 1
- Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ray
April 1, 2023
Replace a fuse
I know where the fuse is but don't know how to get into it
For model number JES0736SM1SS
Hello Ray, thank you for contacting us. We are providing you with the instructions that will help you replace the fuse.
1- Remove the screws holding the casing of the oven.
2- Lift up the oven casing.
3- On the right back side, you will see a noise filter that holds a fuse.
4- Replace the fuse.
5- Put back the casing and tighten the screw again.
We hope this helps!
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Turntable wouldn't turn
Well, I can't honestly say that any repairs were done.....I just replaced the guide roller for the turntable.
The customer service was impeccable - very accurate, professional, and thorough. Shipping was more than adequate.
The customer service was impeccable - very accurate, professional, and thorough. Shipping was more than adequate.
Parts Used:
-
Christine from Edgard, LA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
6 of 13 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Roller Brush Replacement & Filter
Take photos before starting of parts in machine so you know how to replace new parts. Moved skid plate under machine, pulled out felt tip divider, pried up roller with screw driver,, removed belt. Done. Reverse process for new replacement part. Ordered a new belt with original order. Slipped a tool to move old belt off motor shaft.
... Read more
Placed new belt by the end of the motor shaft and then over roller. With a little extra strength push brush shaft back in to position being sure roller shaft was entering holder groves.
Read less
Parts Used:
-
GEORGE R from BREWSTER, MA
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!