Models > JED8430BDS

JED8430BDS Jenn-Air Cooktop - Overview

Get Parts and Repair Help for JED8430BDS

If you know the cooktop repair part you need, you can browse the list of all parts on the JED8430BDS, or you can search by name or part description. You can also find your part by where it is located on the JED8430BDS by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your cooktop. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$19.19

Burner Knob

Sold individually. This brushed chrome knob accepts a double-flat shaft.

$15.13

Grease Filter

This grease filter is made of aluminum and is intended for use with downdraft ranges and cooktops. Sold individually.

$2.70

Screw

This screw is sold individually.

$13.24

Fan Knob

This knob accepts a D-shaped shaft.

$58.06

Surface Burner Switch

This switch controls the stove top surface burner and has a double-flat shaft.

$3.96

Vinyl Tape

$51.16

Fan Control Switch

$8.44

USE MCN TJ114

$55.11

Air Grille

This black air grille is located over top of the blower in the center of the stove top.

$4.46

Infinite Switch Grommet

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Cracked Galss Stovetop

  • Customer: Timothy from huntsville AL
  • Difficulty: Really easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 12 of 14 people found this instruction helpful
1. Removed potand pans from under stovetop.
2. Disconnected exaust duct.
3. Raised the stove and placed wooden blocks under.
4. Unscrewed old top,and removed.
5. Placed new stovetop on stove, screwed into place.
6. Fresh caulk around opening.
7. Lowered stove into place.
8. Reconnedted duct work. read more

old switch had shorted and burned out

  • Customer: Larry from Hampton Cove AL
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver
  • 13 of 18 people found this instruction helpful
This was a range top. i removed the 12 hex machine scews holding on the top, then removed the two star screws holding the old switch. there were fore wire that had fitted on tabs. Hooked them to the new swtch and reassembeld. Easy repair since i could lift the unit out without disconnecting main cables. Replacement range would have been oveer $1000. P... read more

Knob stem broke off at the base near the switch

  • Customer: Samuel from San Antonio TX
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers, Socket set
  • 13 of 23 people found this instruction helpful
Removed stove top from the counter. Removed the glass frame and glass from the top. Removed the broken switch. Replaced with the new switch. Reassembled the unit and replaced it in the counter top.

One problem is the switch only fits in the space one way because of the first burner light. When installed the only way the knob fits on the switch st... read more