This switch controls the dual burner element on the main top.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Element will not heat
This part works with the following products:
Cooktop.
This part works with the following products:
Jenn-Air.
Part# WP74008248 replaces these:
74008248, 7403P831-60
Customer Repair Stories
Average Repair Rating: 3.5 / 5.0, 3 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Water had leaked into the switch shortting it out
Shut off breaker.Disconnected exhaust fan duct.Disconnected main feed wire.lifted stove out of counter.Removed screws from stove top.Remover glass top of stove.removed switch and made a diagram of wires.removed wires.reassemble in revirse order.Very easy everything was exactly the same as the parts I had removed.Thank you
Disconnected fan from vent and raised cook top and rotated one quarter turn to rest on counter top so I could remove screws with 1/4 inch nutdriver in oder to lift cook surface from unit, then install new switch and reassemble in reverse order. Work perfectly!
Joe from Easton, MO
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers, Screw drivers
3 of 7 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
two burners went out
took stove out of counter, propped up with supports, left wires connected. dislmantled stove (no priorexperience) turned each burner on, checked to see if power reached burner with simple 110 220v tester, found burners did noty get power in all positons so burners must be ok., unplugged burner control units to get par
... Read moret numbers, no numbers, went to your site and found diagram with part number. , ordered parts, they came in 3 days, re-assembled and unit worked fine. Easy repair, new flat stove top costs 1200. fixed unit for less than 100. parts couple of hours of my time. 100. with about 4 hrs ofmy time total.
Ask our experts a question about this part and we'll get back to you as soon as possible!
5 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Stephen Gregory
December 5, 2018
Double burner only has high heat. Do i need pn ps12070671-- mfpn (ws11088181) or
Pn ps11744225-- mfpn (wp74008248)
For model number JED8430BDB
Hello Stephen, Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is Part Number: PS11744225, the Dual Switch. Hope this helps, good luck with this repair!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Mac
January 28, 2019
Dual burner switch will not rotate either direction. How do i gain access to switch?
For model number JED843BDB
Hello Mac, Thank you for your question. We do have instructions on accessing the switch on our website. This can be found directly below the Q&A section on the page for part number PS11744225. Hope this is helpful! Have a nice day.
Was this helpful?
Thank you for voting!
Jim
January 16, 2024
Received and installed dual burner switch WP74008248 to correct burner only working on high. Unfortunately no change. Checked burner element and appears no breaks in heater wire for both high and low ranges. Checked all connections. Appear solid. Wiring to and from switch all well attached. No breaks seen anywhere. Any ideas and what to look at next? Many thanks.
For model number JED8430BDF18
Hi Jim, thank you for getting in touch. Based on the description you have provided, the issue could be with the dual surface element, part number PS11744430. You may need to replace it to fix the issue. We hope this solves your problem!
The light (red) illuminating underneath the glass top for the dual burner will not turn off.
For model number JED8430BDB18
Hello Emanuel, thank you for getting in touch. According to our research, the issue is most probably with the dual burner infinite switch, part number PS11744225. You may need to replace it to fix the issue. We hope this sorts out your problem!
Was this helpful?
Thank you for voting!
Brenda
November 12, 2017
Dual burner switch controls which burners
For model number Jed8430bds18
Hi Brenda, The Dual Burner switch controls the dual burner on the front right of the cooktop. Hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
