Models > JED8430BDB > Instructions

JED8430BDB Jenn-Air Cooktop - Instructions

All installation instructions for JED8430BDB parts

These instructions have been submitted by other PartSelect customers and can help guide you through the cooktop repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the JED8430BDB
16-30 of 48
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Knob on the exhaust fan was broken

  • Customer: James from Sacramento CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 0 of 1 people found this instruction helpful
Simply removed old knob and replaced.

sticking/broken pop up knob

  • Customer: Robert from Northville MI
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers
  • 0 of 1 people found this instruction helpful
I used needle nose pliers to remove the broken piece then pushed the new knob on!!

Fan knob broke

  • Customer: Katherine from Arcadia CA
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers
  • 0 of 1 people found this instruction helpful
Read the other folks descriptions of how they pulled out the leftover parts with needle nose pliers after they figured that the new knob would not fit with those other parts still on the range top. Took the leap of faith, pulled the parts out until I got to the D knob and slid the new part right on.

switch for burner, when turned on, would set breaker to off

  • Customer: Gail from Sedona AZ
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Socket set
  • 1 of 4 people found this instruction helpful
Lifted stove top from counter, removed screws securing glass top, removed screws from switch housing. Removed color coded wires from old switch, one at a time, and secured them to the new switch. Put it all back together and just like new. Probably saved $200 service call.

Broken control knob

  • Customer: Joseph from San Jose CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 11 of 34 people found this instruction helpful
Put new knob in place and threw broken one in trash/

Needed stove top cleaner and scraper

  • Customer: Doris from Camden-Wyo. DE
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Absolutely perfect, no problems

I didn't end up with the correct item

  • Customer: Gary from Dana Point CA
  • Difficulty: Really easy
  • Time to Complete: More than 2 hours
  • Tools Required:
  • 0 of 0 people found this instruction helpful
I ordered a switch and got a switch knob. So it is still not working.

Surface Burner Short

  • Customer: John from San Antonio TX
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers, Socket set
  • 0 of 0 people found this instruction helpful
Removed the cook top from the counter. Removed the switch housing and then the switch. Found a match and ordered. Part came in 2 business days. Once I put together the housing and connected the wire housing the burner worked perfect. The downdraft fan remained on. Placed a call to Jenn Air service and was asked to disconnect the fan switch. There must be some memory in the solid state portion of the switch. After a few mins I replaced the fan switch and hooked up the wiring. All worked fine.

replacement of broken knobs

  • Customer: Yulanda from Fairburn GA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
open packaging and placed knobs on stems of the cooktop.

Fan swith poped out -couldn't replace it

  • Customer: Raymond from Long Beach WA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers
  • 0 of 0 people found this instruction helpful
Ordered new part--on line help said pull all remaining parts out--small pair of plyers and yanked internal parts out--the new part just slipped down over the u-post and back in business--couldn't have been easier

Water boiled over burnt out switch

  • Customer: Eddie from Loyall KY
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Knocked breaker removed stove top from iland removed a dozen screws replaced switch put screws back in installed top back in iland put breaker back in worked purfect.

Fan knob would not pop up as designed.

  • Customer: Raymond from Soddy Daisy TN
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers
  • 0 of 0 people found this instruction helpful
Removed old knob by pulling straight up. The shaft the knob fits on is D shaped. Simple align knob with D on shaft and push down. Problem solved.

burner switch broken

  • Customer: larry from houston TX
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers
  • 0 of 0 people found this instruction helpful
turned off power to stove top..lifted unit out unscrewed top and switch had 2 screws re-placed switch and put back together.. make easy $100 plus switch

Our old grease filter was molding

  • Customer: Kathy from Gurnee IL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Took the old filter out and put a new one in. No tools no fuss no muss. Very easy.

Lost one turner knob and others were a mess. Center airgrille was getting old and discolored

  • Customer: Elizabeth from Hudson OH
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Just slipped the perfect parts in.
All Instructions for the JED8430BDB
16-30 of 48