Models
>
JED8430BDB
JED8430BDB Jenn-Air Cooktop - Overview
Models starting with JED8430BDB
Click on the best match to narrow your results.
Keep searches simple, eg. "belt" or "pump".
Burner Knob
PartSelect #: PS11744413
Manufacturer #: WP74010839
Sold Individually. This knob accepts a double flat shaft.
$40.04
In Stock
Cooktop Downdraft Vent Grease Filter
PartSelect #: PS11757584
Manufacturer #: WPY706012
This is a grease filter, and it works with your range/stove/oven. This part is chrome-colored and measures 16.5 inches long by 9 inches wide. It is made of metal and is intended for use with downdraft...
$48.41
In Stock
Screw, 8/18 x 3/8
PartSelect #: PS11746840
Manufacturer #: WP90767
This screw is sold individually.
$5.42
In Stock
Fan Knob
PartSelect #: PS11744721
Manufacturer #: WP7739P122-60
This knob accepts a D-shaped shaft.
$23.11
In Stock
Surface Burner Switch
PartSelect #: PS12070671
Manufacturer #: W11088181
This is the replacement surface burner switch for your range. It measures approximately 1.5 inches by 1.5 inches, with a shaft that is approximately 1 inch long. The surface burner switch turns the su...
$83.91
In Stock
Cooktop Cleaner
PartSelect #: PS2344170
Manufacturer #: TJ114
Cleans/Polishes all glass, ceramic, porcelain and fiberglass surfaces.
No Longer Available
Cooktop Cleaner
PartSelect #: PS3492527
Manufacturer #: W10355051
This bottle of non-abrasive cooktop cleaner breaks down and gets rid of the hardest baked-on stains and residue without causing any harm to your appliance. The bottle is 10 oz and does not require a l...
$17.76
In Stock
Appliance Scraper
PartSelect #: PS408570
Manufacturer #: WA906B
Use this scraper for your ceramic/glass cooktop. It has a retractable blade and is an all-purpose tool for cooktops, mirrors, windows and tile. Use it to also remove paint, paper, dirt, stickers and more.
$10.79
In Stock
Cooktop Cleaning Kit
PartSelect #: PS2339647
Manufacturer #: TJ119
This kit includes Cerama Bryte cleaner, the scraper and a cleaning pad.
No Longer Available
Common Symptoms of models starting with JED8430BDB
[Viewing 2 of 2]
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Cracked Galss Stovetop
1. Removed potand pans from under stovetop.
2. Disconnected exaust duct.
3. Raised the stove and placed wooden blocks under.
4. Unscrewed old top,and removed.
5. Placed new stovetop on stove, screwed into place.
6. Fresh caulk around opening.
7. Lowered stove into place.
8. Reconnedted duct work.
2. Disconnected exaust duct.
3. Raised the stove and placed wooden blocks under.
4. Unscrewed old top,and removed.
5. Placed new stovetop on stove, screwed into place.
6. Fresh caulk around opening.
7. Lowered stove into place.
8. Reconnedted duct work.
Parts Used:
-
Timothy from huntsville, AL
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
36 of 44 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
old switch had shorted and burned out
This was a range top. i removed the 12 hex machine scews holding on the top, then removed the two star screws holding the old switch. there were fore wire that had fitted on tabs. Hooked them to the new swtch and reassembeld. Easy repair since i could lift the unit out without disconnecting main cables. Replacement range would have
... Read more
been oveer $1000. Psrt was under $40 and delivered in a matter of days.
Read less
Parts Used:
-
Larry from Hampton Cove, AL
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver
37 of 50 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replace Grease Filter For Downdraft Stove Top
Lift off blower vent cover. Lift out old filter. Clean walls and bottom of down draft using degrease soap and warm water. Dry. Discovered my grease filter will not install diagonally as shown in unit manual. Decided to drop into downdraft and put in front of fan suction. Found this left a gap at the top of fan suction that was not co
... Read more
vered by the filter. Cut piece of wood 1 inch thick and width and length to drop down in the downdraft and lay on bottom. Set filter on top of wood in front of the fan suction. Verified that fan suction would pull filter tight against the opening by turning fan on and off. Put vent cover back over downdraft and told wife I was done.
Read less
Parts Used:
-
Johnnie from Daphne, AL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
27 of 33 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!