Models > JE1860CH04

JE1860CH04 General Electric Microwave - Overview

Get Parts and Repair Help for JE1860CH04

If you know the microwave repair part you need, you can browse the list of all parts on the JE1860CH04, or you can search by name or part description. You can also find your part by where it is located on the JE1860CH04 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your microwave. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$6.62

FUSE

$13.25

Rotating Ring Guide

This part has the 3 legs and is not formed in a circle.

$55.52

Glass Cooking Tray

This tray rotates in your microwave ensuring more even temperatures.

$35.45

Synchronous Motor

$26.89

2-Terminal Micro-Switch

Also known as Interlock Switch. Appliance normally takes 2 of these. This part is used to stop the flow of electrical current when the door is opened to prevent any microwave en...

$6.62

Light Bulb - 125V 20W

$114.27

Magnetron

This part is used to generate microwave energy/heat.

$5.74

WAVE GUIDE - MICA COVER

$8.61

LATCH DOOR

$23.71

CAPACITOR HIGH VOLTAGE

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Microwave completely stopped working

  • Customer: Kim from Cliffside Park NJ
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 290 of 382 people found this instruction helpful
Turned out the issue was easily solved by replacing a single, inexpensive fuse.

First off, UNPLUG THE MICROWAVE.

The fuse is located under the plastic grill at the top of the microwave. It's held on by two screws. Once you've removed the screws and taken off the plastic grill, you go to the right side of the microwave and remove an... read more

Microwave not heating

  • Customer: Steven from Manassas VA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 66 of 105 people found this instruction helpful
Rmovd top vent screen. Removed control panel. Removed fuse cover panel. Replaced fuse. Removed housing of door switches. Removd wiring from door switches and and removed door switches from housing. Replaced with new switches and re-connectd wiring. Re-attached panels. read more

I diagnosed the problem incorrectly: based on a previous repair.

  • Customer: Ralph from Brandon FL
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 24 of 52 people found this instruction helpful
The old fuse is perfectly good. The new ones arrived within a day. read more