Models > JE1650AA01

JE1650AA01 General Electric Microwave - Overview

Get Parts and Repair Help for JE1650AA01

If you know the microwave repair part you need, you can browse the list of all parts on the JE1650AA01, or you can search by name or part description. You can also find your part by where it is located on the JE1650AA01 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your microwave. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the JE1650AA01 [Viewing 1 of 1]

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$7.05

Line Fuse

Order within the next 11 hrs and your part ships today!
$20.71

Secondary Door Switch

Order within the next 11 hrs and your part ships today!
$19.00

Monitor Door Switch

Order within the next 11 hrs and your part ships today!
$19.21

Oven Cavity Thermal Cut Out

Also known as a Sensor or Fuse. This part will trip once the inside of the cavity overheats and exceeds the recommended temperature.

Order within the next 11 hrs and your part ships today!
$67.42

High Voltage Diode

This diode has a 1/4" female connection and an eyelet.

Order within the next 11 hrs and your part ships today!
$139.28

Cooking Tray

Order within the next 11 hrs and your part ships today!
$3.00

Spring - Button

Order within the next 11 hrs and your part ships today!
$228.09

Magnetron Assembly

This part is used to generate microwave energy/heat.

Order within the next 11 hrs and your part ships today!
$3.64

PIN-HINGE

Order within the next 11 hrs and your part ships today!
$202.66

TRANS-H.V

Order within the next 11 hrs and your part ships today!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Microwave completely stopped working

  • Customer: Kim from Cliffside Park NJ
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 434 of 567 people found this instruction helpful
Turned out the issue was easily solved by replacing a single, inexpensive fuse.

First off, UNPLUG THE MICROWAVE.

The fuse is located under the plastic grill at the top of the microwave. It's held on by two screws. Once you've removed the screws and taken off the plastic grill, you go to the right side of the microwave and remove an... read more

light worked, timer and control pad worked, but no turntable, no heat, no noises of any sort, just didn't start up

  • Customer: Marla from Arlington TX
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 128 of 148 people found this instruction helpful
Noted on partselect.com that someone else with this problem, found it to be secondary door switch. There are three door switches in this model, but online info noted that one of the three might feel "soft" (in my case, one switch clicked in a rather "jiggly" way, the other two were strong decisive clicks.) To access the door switches on this model was the ... read more

Microwave dead--no LEDs lit on front panel

  • Customer: Steve from Redmond WA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 29 of 36 people found this instruction helpful
Removed microwave from enclosure and removed cover, hoping it was as simple as a blown fuse. Found extremely helpful diagnostic sheet thoughtfully provided by manufacturer in an envelope affixed to top of cavity. Fuse was fine, but tracing the power feed into the machine revealed that the oven cavity thermostat was open--no continuity across it, and the diag... read more