Models > JDG2000A > Parts

JDG2000A Jenn-Air Dryer - Parts

All parts for the Jenn-Air Dryer JDG2000A

Below is a list of all parts for the Jenn-Air Dryer JDG2000A - Residential. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the JDG2000A
1-14 of 119
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$10.76

Multi Rib Belt - 92-1/4"

This dryer drum belt has four ridges, three grooves and is 1/4" wide.

$15.10

'M' Series New Style Coil Kit

This gas dryer ignition coil set comes with two ignition coils: one three terminal Boost/Hold coil, and one two terminal secondary coil. Usually only one of them burns out but you should replace them as a set. Both have to be operational for the gas valve to open.

$29.69

Radiant Flame Sensor

This part senses the flame for heat allowing the gas valve to open.

$17.17

High Limit Kit

This kit comes with three separate thermal fuses and is usually used with clothes dryers that have a fan mounted on the motor shaft. Included within this kit is the high limit (Limit: 258) the gas high limit (Limit: 240) and the gas and electric high limit thermostat (Limit: 300).

$37.91

Rear Drum Support Roller Kit

Included in this rear drum support roller kit are 4 screws, 1 spacers, 2 washers, 2 retaining rings, 2 rear rollers, and 2 cylinder support shafts. *** Note: Per manufacturer thi...

$5.00

Screw

This screw is sold individually.

$4.87

Blower Wheel Clamp

This clamp is used for the blower wheel.

$2.70

SCREW

This screw is sold individually.

$37.02

Blower Wheel

This wheel has a deep D-shaped shaft receptacle. The spring clamp is not included with this part.

$30.80

Front Glide Kit

This kit includes 2 glides (left and right), 2 pads with adhesive backing and 1 support brace.

$16.97

Drum Felt Seal

Depending upon your model, this seal can be used on either the front or rear drum. The hi-temp adhesive is sold separately.

$25.40

Igniter with Wire Harness

This part lights the gas burner to create heat.

$10.79

Drum Glide and Cushion Kit

Pad has adhesive backing.

$37.34

Blower Wheel - B/10 Models

This blower wheel is suitable for some clothes dryers of the 10 and earlier series. Manufactured to fit a 1/2 inch motor shaft, this blower wheel is 3-1/8 inches deep. The diameter of the wheel is 7-1/8 inches, and the spring clamp is not included.

All Parts for the JDG2000A
1-14 of 119