If you know the dryer repair part you need, you can browse the list of all parts on the JDG1000W, or you can search by name or part description. You can also find your part by where it is located on the JDG1000W by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your dryer. We’ve also included any installation videos we have for JDG1000W parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.
This dryer drum belt has four ridges, three grooves and is 1/4" wide.
This gas dryer ignition coil set comes with two ignition coils: one three terminal Boost/Hold coil, and one two terminal secondary coil. Usually only one of them burns out but you should replace them as a set. Both have to be operational for the gas valve to open.
This kit comes with three separate thermal fuses and is usually used with clothes dryers that have a fan mounted on the motor shaft. Included within this kit is the high limit (Lim...
This lint filter screen has two side guides on either side of the screen. One measures 3/8 of an inch wide, while the other measures 5/8 of an inch wide.
This part senses the flame for heat allowing the gas valve to open.
This kit comes in two pieces: the catch and the clip.
Included in this rear drum support roller kit are 4 screws, 1 spacers, 2 washers, 2 retaining rings, 2 rear rollers, and 2 cylinder support shafts.
*** Note: Per manufacturer thi...
This clamp is used for the blower wheel.
This screw is sold individually.
Fixed by these parts
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2015 , Eldis Group Partnership. All rights reserved.