JDB8910AWS Jenn-Air Dishwasher - Instructions

I had to get my son to twist off the spray tower, the otherwise the transition to our new racks was quite easy. I did have to look up on the internet Maytag site how to get the spray tower off and how to install a side piece on the upper rack. Easy to do however.

Ordered parts and referred to exploded component drawings on the website to install replacements. Videos were helpful. Be careful to check all plastic parts for deterioration so that you can order them all at once. I had to make two additional orders for rollers and retainers that looked fine, but were brittle and needed replacement.

replacing the rack was easy - but first we had to swap out the plastic spay tower that twist-locks onto the new rack. My smart wife figured this one out, despite the lack of any trace of instructions (the less astute amature repairperson would have mangled the whole shootin' match attempting to make the change); that said, the rack was not a "one-to-one" match, as it lacked the original's high left sidewall and a few other minor differences that did not affeect the overall performance of the part - a not uncommon occurance in the aftermarket parts world.

Removed top basket. Removed old mounting wheels. Installed new wheels on mounting strip. Re-installed basket.

Vidio was all i needed.

Part was extremely easy to find. Part arrived very quickly and fit Perfectly. Easy repair.

replaced strip and wheels. Trick was getting the strip off w/o any instructions on how to do so. There was a trick -- remove an end cap using a screw driver to free a latching tongue-- that worked once I figured it out.

Placed it back together. Part select was right on time and used this companys site for yrs

did not even tell me that i had to order 2 packs of wheels with a little patients saw how to remove all 4 wheels to disassemble and re mount new parts Mounting bar replaced on r side is just carfully lined up and will come out of rack side and in reverse order carefully with out forcing replace 2 small V shaped parts must be lined up with their respective holes

Opened the box and put the new Silverware Basekt in the Dishwasher. Everything was atttached, no labor involved. Loved it, wish I had thought about ordering it earlier. Ordering, Receiving and Installing was EASY and QUICK. Thank You!

Removed the upper rack rail stops. Removed the upper rack by pulling outward until the rack rollers cleared the rails. Attached the new roller on the upper rack. You can look at the other undamaged rollers to see how they lock into place. re-install the upper rack by feeding the upper rack rollers back onto the rails. Install the rail stops back into the rail ends,and the job is complete. VERY EASY!

I had to call an appliance repairman to come fix it. If I would have been able to pull the dishwasher out, it would have been a simple fix. It would not come out and I loosened to water line trying therefore causing more problems.

I had to cut the old rack for 2 axles and add 2 wheels from the old rack to the new one that was sent. the new one had 2 less wheels.I used white zip ties and wheels from the old rack. Placing the wheels in the right place I used the zip ties to hold them in place. Without the extra wheels like the old rack had the new one would fall into the bottom of the dish washer. Working just fine so far.

Top holder was turning black and disintergrating. I orderder the part and the box arrived but I havem't had time to install it

ordered the basket and put it in its place.