JDB4000AWS Jenn-Air Dishwasher - Instructions

Once disassembly was done, it wasn't that difficult. Had to hand screw everything back,

removed door panel, using torx wrench. I used an allen wrench configuration, has 90 degree bend in it, of the torx tool. In the future I would use a 'screw driver' configuration, i.e. straight shaft with handle on end. used screw driver to pry off old latch. reversed process to install new latch and handle mechanism. repair video provided by partselect was spot on! Partselect is my 'Go-To' from now on and am looking forward to contacting them for my next repair.

When ordering the parts there is a repair video of how to replace the door latch. Even though it was not necessary for this repair it is always nice to see someone else do the repair first so there are no unforseen items. This repair probably took longer to find the T20 than it did to do the repair.

Turned off the power to the dishwasher. Took off interior door pannel with torx bit driver, unplugged the connectors on the old latch assembly. Attached the connectores to the new assembly. Reinstalled the interior door pannel. Turned power back on. Done!

Replaced door latch

Everything went well and was pretty easy. The only slightly tough area was getting the wire clips to release off the terminals. You for sure want to cut the power to the dishwasher before starting your repair

replaced latch assembly. appears to be a design weakness in the latch.

removed inner panel with torqs wrench and replace handle module all items were plug in. The only thing i would suggest is get the inner gasket since the soap tends to build up on the bottom. I cleaned it and applied vaseline to make a good seal, it is best to remove the door and clean it with a hose which is easy with the panel off.

Watched the video and could not figure out why the handle was taken off and which handle was re installed before the part went in. Did none of that just took out the screws on the door removed old part and installed new one. The new part dropped into place no problem.

I watched the on-line instructional video provided by Partselect and 15-20 minutes later the dishwasher was washing dishes again. The part came within 2 days; you guys are awesome. Happy wife, happy life....

I ordered the part at 12:30 p.m. and just took regular delivery in 3-5 days. The part arrived at 8:30 a.m. the next day and had it installed in less than 15 minutes. Very convenient and easy to do.

I nearly panicked when I found out that my DW handle was broken--I couldn't even get the door to open after running it. I finally yanked on it very, very hard and it popped open so I could empty it, but then I needed to figure out what was wrong. Not wanting to call a repair man for just a broken handle, I looked on the internet and found your website. I watched the video for the handle assembly installation and decided I certainly could do that myself (after all, I'm only a woman and 66-year-old at that). I took out all of the screws holding the door panel on and saw the real problem--the pivots on the plastic handle that hangs outside of the dishwasher had broken off and all I needed was a completely new assembly. I ordered that, it arrived quickly, and I attached it after disengaging the latch, screwed the panel back on, and voila! everything worked perfectly. I didn't use your switches since mine were already attached to the wires. I just reinstalled them on the new latch in the same order they came off. I'll tell you, it was a very empowering event for me, plus saving myself an expensive service call. That video of the installation was the whole key. It allowed me to see that I could do it myself or at least try it. Thank you so much!

open door and remove screws that holds inner door panel to the outer panel assembly. remove two screws that hold latch assembly to outer door panel. unplug two switches from latch assembly and then reverse the procedure.

I found your website and the instructional video. The video was exceptional. I ordered the part and was here in two days. That blew me away. Changing out the part was just like the video and took me less than 15 minutes. The best thing, by ordering the part and following the video I saved about $100 in a service call. Best yet, I didn't have to do the dishes. Thanks!

removed 11 screws that were around the inside of the door allowing the front of the door to come loose. Then removed the door latch assembly, unhooked the wires from it, hooked the wires onto the new door latch assembly and put the latch back in place. Put the screws back in and the project was complete.