Models > JDB1270AWY > Instructions

JDB1270AWY Jenn-Air Dishwasher - Instructions

All installation instructions for JDB1270AWY parts

These instructions have been submitted by other PartSelect customers and can help guide you through the dishwasher repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the JDB1270AWY
316-330 of 342
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Cup clip cracked some time ago, and a second one recently did the same.

  • Customer: John from Lake Havasu City AZ
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Ordered replacements for all 4 cup clips and, as usual, they were the exact perfectly matching part from PartSelect. Snapped in by hand in just a few seconds. Tip: when seating the new clip, install one end and then push the connecting bar and not the second end. Pushing the bar will slightly angle the end - allowing it to snap over the tine easier.

door wasn't latching and started its cycle before door was shut

  • Customer: Randall V from Loveland OH
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
I just followed another persons directions that was in the system already. He had a great idea by taking the new switches out of the new latch and replacing them with the old ones from the bad latch. The old switches are still good and it made for a simple repair. This way you didn't have to disconnect the wire from the switches and now you have two new switches on hand. The old switch had a burnt spot on the connector.

My old silverware basket was breaking away

  • Customer: Amy from WELLSVILLE UT
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Ordered a new part and simply placed it in where the old part was, make sure you have measured the dimensions of your space, includes a handle for easy lifting, and snap doors for small accessories

Dishwarsher was making loud almost grinding type noise

  • Customer: martha from Punta Gorda FL
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
I followed the video instructions except I had no idea what tools he was using because he talked so fast, but I figured it out myself. I could not get the guard off but I worked around it. Then I took off the discharge piece. The impeller needed to come off and I unscrewed it but the impeller was stuck tight to the diswasher. It did not slide off like in the video. I ended up having to break up the impeller with pliers until it fell apart enough to take off.That was the only semi difficult part. I replaced impeller. The new screw I ordered did not fit on my machine??? So I used the old one again. I reassembled all and the dishwasher now works good. Still makes a little noise which could be normal. Nothing like it was making.

broken silverware basket

  • Customer: Janet from Norwood MA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
This replacement basket fit perfectly, is well made, and came speedily, as promised!

Silverware basket was broken

  • Customer: Jack from Leesburg VA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Take out old basket throw it away. Put in new basket. time: 20 seconds. It took longer to open the package. I'm guessing at the brand, and I'm not going to my other house to find out.

Not cleaning top rack

  • Customer: JOSEPH from ST. LOUIS PARK MN
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
After installing a new filter, :( I tried this. I wish I would have done this first since it's way cheaper and easier!!! If your dishwasher slowly starts to decline in its ability to clean the dishes, it's probably this problem.

The old silverware basket started cracking and coming apart after 5 years or so.

  • Customer: Brian from St. Louis MO
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
I opened the door of the dishwasher, pulled out the old silverware basket, and then placed the new silverware basket where the old one was. The whole time, I was imagining how much it would be to call up and appliance repair guy and have him do this.

Replace silverware basket.

  • Customer: Jerry from Lubbock TX
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Lifted old one out. Set new one in.

Plastic wheels on lower rack of dishwasher broke

  • Customer: Mary from Felton CA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Replaced the wheels with new ones I purchased from Parts Select. They just snapped right on. I will definitely use Parts Select again for any future items I need. The service was very fast and parts are marked at a reasonable price.

Basket Tray wore out on bottom and silverware would not hold.

  • Customer: Suzanne from South amboy NJ
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
I just opened the package, pulled out the baskets, separated them and put them directly in the dishwasher. The video showed the part and size of the baskets which was very helpful. The delivery was EXCELLENT!!! I would purchase from PartSelect again!

I needed a replacement silverware basket

  • Customer: Jillene from Green Bay WI
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
I took the old one out of the dishwasher and put the new one in. The new one is much nicer and heavier than the original one!

Food chopper was broken.

  • Customer: Bob from Souderton PA
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers, Wrench set
  • 0 of 0 people found this instruction helpful
Followed video. Everything went together fine, but leaked water around motor shaft seal. Read comments section on video and someone had the same problem. I had pushed the seal into base too deep. I pulled it out and reseated it. It worked without leaking after that. Bob

lime up

  • Customer: myron from Indianapolis IN
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
took inside front off disconnect wires pull old unit out and put new unit in then put inside front back on tighten screws was done unit works like a new machine

Start Button malfunction

  • Customer: Henry from Galesville WI
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Dissassemble the door. Remove the control panel. Install the new panel and re-assemble the door. Make note of the orientation of the control panel plug on the circuit board. There isn't any indicator that the terminal strip is up-side down other than the new panel doesn't work.
All Instructions for the JDB1270AWY
316-330 of 342