JDB1100AWS Jenn-Air Dishwasher - Instructions

Easiest ever. Recycled the old one and put the new in its place. We are trying to place the silverware in, rather than dropping it in. It was suggested in the video from this website.

1- replaced accumulator filter and docking station with flappers, the docking station with flappers may not have been necessary? But what the heck, if your into it this far why not. Check out the tech. Video it was helpful. The dishwasher works like new now. 2- the door latch switch was worn out, to replace this part I first unplugged the power cord then removed the 8 screws from the inner panel of the door exposing the door latch assembly. Unplugged the two connectors and installed the new part and reassembled everything, pretty easy! The dishwasher works like new now, and for around $ 102.00 bucks, saved lots of money doing it myself, thank you Parts Select for your help. Carlos, Lancaster, California.

Replaced The part. Picked up the old one and repurposed it in the work shop and dropped in the new one ...no tools needed. The real story here is that this web page existed and I was able to get the exact replacement part I needed delivered to my house.Piece of cake,

Replaced silverware basket. Works as designed. Speedy part delivery and great service!

ordered the basket and put it in its place.

I ordered the basket on Sunday and received it on Tuesday. It is a better basket than what originally came with the dishwasher. Very happy with the prompt delivery and service.

I Googled parts for an Electrolux wheel and Parts Select came out with a picture that confirms the one that I need. The price of the item was very reasonable as compared to the official website of the manufacturer. I like what I saw and bougt 4pcs instead. I will recommend Part Select to my friends without hesitation.

Removed the bottom spray arm, the filter cover the filter ane the impeller. Then put it back together. Worked like a champ.

The troubleshooting and repair videos made locationg the problem and ordering the proper replacement part was easy. The repair video took me through the entire process.

Watched a brief video online at PartSelect site. Video was easy to follow and there were no surprises as I followed the instructions.. I highly recommend the PartSelect company. Herb Wise

Pulled dishwasher out of cabinet. Layed it face down on a rug. It was very simple to remove the old water inlet valve. Following the video I saw on line was a big help. I put the new valve in its place, stood up the dishwasher,turned on the water and everything was fine. Put the dishwasher back in the cabinet,there were 2 screws that fastened the dishwasher to the cabinet.Very simple.

Aligned the hole and the appropriate part of the wash arm and snapped them back in. Thanks.

With dishwasher removed from cabinet, I next removed the dishwasher racks and with a large adjustable wrench turned the vent cover (located on side wall) inside the dishwasher counter-clockwise a quarter of a turn or so and removed the vent cover and then air/ water inlet unit from the outside of the machine. I cleaned the unit and washer wall area prior to replacing the gasket. Replaced the gasket in the air/water inlet vent and reassembled in reverse order. Entire gasket replacement repair took about 5 minutes or less. Most of the time in this project is spent removing and then replacing the dishwasher in the cabinet cavity. My total project time was about 30 minutes.

Instructions on "how to" change this part are at the end of this rant. First , I'll tell how I know. Jenn-Air (and several other brands that use this same control panel) have a design defect that makes the Touch Pad Control Panel go out every two or three years due to the steam and water condensation. Last time this happened to me, the repairman came to the house to check out the problem, then ordered the part, and finally returned to install it once it arrived in the mail. I watched him change out the panel and noticed it didn't seem very complicated. This time, I decided to order the part prior to calling the repairman in hopes of saving time and a few bucks (the part seemed expensive but it was cheaper than when I had the repairmen order it.). When the part arrived, I was too busy to set up a visit from the repairman so I left it in the box for a week. Then, on Sunday, I was relaxing, got bored, and I decided I'd try to replace it myself. Turned out, it was easy to do and, thus, it was not necessary to call the repairman at all. That definitely saved money! Having watched the part being replaced a couple of years ago made it easier for me to do, but I think it would be easy for any mechanically minded person to figure out. It's all very straightforward. Do remember to turn off the electricity, or it will remind you as it did me._________* How to: 1. Turn off electricity to dishwasher. 2. Remove all the bolts in the door frame (note where the two long bolts that attach to the dishwasher front are located.) 3. Remove the front Dishwasher panel by pulling it up to detach. 4. Open a gap between the inside panel and the control panel and notice how the electric ribbon connector attaches and detaches - then detach it. 5. Open the gap wider, find and remove the three screws located at the bottom of panel that you are replacing. 5. Detach the whole plastic control panel by pulling it out of the slot. 6. Push the new Control panel into place. 7. Screw in the three screws at the bottom of the control panel. 8. Attach the electric ribbon connector - push it in securely without bending. 9. Close gap between the inside panel and the control panel and replace all the short bolts securely. 10. Slip Dishwasher front into place and then replace the two long bolts to hold it securely. 11. Turn on electricity and test the lights on control panel. If the lights work, the dishwasher should work. Congratulations. No charge. You've got to love the internet.

I watched the youtube video and followed the steps. The first time I tried it without taking the motor out because I didn't want to spill water on the floor, but I wasn't able to tighten the new motor shaft all the way so nothing lined up and it didn't work. Second time I followed instructions exactly and it worked like a charm. This is the second repair I have made to this dishwasher that was given to me for free because the door latch was broken. I fixed that problem for around $12.00. This time it broke because something metal got jammed in the motor causing the threaded shaft to strip. This repair cost around $80.00. Still the cheapest, nicest dishwasher that I could ask for. A+++ for partselect.com on price, service, and delivery. Thanks.