Quick Question!

Have you ever purchased from PartSelect.com before?

Models > JBS27WH2WW

JBS27WH2WW General Electric Range - Overview

Get Parts and Repair Help for JBS27WH2WW

If you know the range repair part you need, you can browse the list of all parts on the JBS27WH2WW, or you can search by name or part description. You can also find your part by where it is located on the JBS27WH2WW by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for JBS27WH2WW parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$3.88

Light Bulb - 40W

This an authentic OEM 40-Watt replacement light bulb, used in a number of household appliances. It is specially designed to withstand extreme temperatures, which is why these repla...

Order within the next 3 hrs and your part ships today!
$7.42

Drip Bowl - 6"

The dishwasher roller assembly attaches to the dishrack located in the upper level of the dishwasher. It allows the dishrack to slide and roll easily. If the upper rack keeps falling off the track in dishwasher, the door will not close, the door makes noises, and/ or dishes are not cleaning properly, then it is best to replace it for more security. A flat-blade screwdriver is the only tool needed for this installation. Slide open the upper dishwasher rack and remove retaining tab from both ends of the rack and slide it out. Locate the older roll assembly, remove it, and replace the rollers. Remember to put back the tabs on each side before sliding it back in. Make sure the dishwasher is off before starting this installation project.

Order within the next 3 hrs and your part ships today!
$9.43

Drip Bowl - 8"

This drip bowl is sold individually. It is chrome in color and measures 10 inches in diameter at the widest point, with a hole in the middle. This is used to catch drippings and fo...

Order within the next 3 hrs and your part ships today!
$68.62

Bake Element - Push On Terminals - 240V

The bake element is located on the bottom of the oven. If your oven will not heat properly it may be due to a faulty or damaged baking element. If you can see that the element has been separated or blistered, you should replace the part immediately. If there is no visible damage, turn the oven on and check to see if the element heats evenly. If the element is not heating evenly, or if it is not heating at all, it will need to be replaced. This element is 19 inches wide x 19 inches long, and has male spade push on terminals.

Order within the next 3 hrs and your part ships today!
$13.10

Surface Burner Terminal Block Kit

This kit includes the female contact with wires, terminal block and mounting clip.

Order within the next 3 hrs and your part ships today!
$22.98

Surface Burner Switch - 8" - 2500W

Order within the next 3 hrs and your part ships today!
$43.59

Oven Rack

The oven rack is sold individually. It is chrome in color and measures approximately 24 inches wide by 17-1/2 inches deep. The rack is used to hold cookware in the oven and slides ...

Order within the next 3 hrs and your part ships today!
$14.37

Surface Burner Terminal Block Kit

Also known as receptacle.

Order within the next 3 hrs and your part ships today!
$46.81

Surface Burner Element - 8"

This Y-frame eight inch surface burner element has five turns and a metallic center medallion.

Order within the next 3 hrs and your part ships today!
$26.32

Surface Burner Switch - 6" - 1560W

This switch controls the small burner on a range/stove top.

Order within the next 3 hrs and your part ships today!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Burner bowls needed replacement

  • Customer: Tom from North Prairie, WI
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 472 of 478 people found this instruction helpful
Very easy repair, Pulled burner coil out, removed old burner bowl. Put in new burner bowl, plugged burner coil back in... easy as 1,2,3 read more

Burner Bowl Needed Replaced

  • Customer: Stephen from Knoxville, TN
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 517 of 675 people found this instruction helpful
Removed burner element and put in bowl read more

Burner bowls were rusty and unsalvageable. Surface element wasn't heating.

  • Customer: Marguerite from Palm Harbour, FL
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 220 of 284 people found this instruction helpful
Removed all surface elements, threw away old burner bowls, put the 3 older surface elements back in place and inserted the new element.

The burner bowls look great. Now I won't wait so long to replace.

Thanks. read more