Models > JB960WY1

JB960WY1 General Electric Range - Overview

Get Parts and Repair Help for JB960WY1

If you know the range repair part you need, you can browse the list of all parts on the JB960WY1, or you can search by name or part description. You can also find your part by where it is located on the JB960WY1 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for JB960WY1 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the JB960WY1 [Viewing 3 of 3]

$2.52

Light Bulb - 40W

Sold individually.

$20.34

Broil Element

The depth of the screw-on terminals is 2-3/4 inches and they are 1-1/4 inches apart.

$22.41

Infinite Switch Kit

The infinite switch controls the stove top surface burner. This switch will work with most of the electrical range models with coil burner elements.

$89.55

Oven Sensor

This sensor detects the temperature within the oven cavity.

$110.80

Dual Haliant Element with Limiter - 9" - 2500W

$5.55

Oven Light Socket - With Push In Receptacle

$1.34

Screws - Package of 12

$4.41

Light Cover

$16.87

Broiler Pan - Large

Includes the pan and grate.

$13.40

Bottom Trim - White

Screws not included.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Oven tempature was approximately 150 degrees to low

  • Customer: James from Austin TX
  • Difficulty: Easy
  • Time to Complete: 1- 2 hours
  • Tools Required: Nutdriver, Screw drivers
  • 137 of 160 people found this instruction helpful
This repair is EASY if you know how to use an ohm meter. If not, seek help for this step.

SYMPTOM:
The oven (JKP27WOP3WG or JKP27WP3WG and many ovens like it ) was not getting hot enough. Verifying the cooking temperature with an typical oven thermometer, I was able to determine that the oven was cooking temperature was about 150 degrees t... read more

Large burner on dual element burned out

  • Customer: Scot from Oakland FL
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers, Wrench(Adjustable)
  • 37 of 43 people found this instruction helpful
This was really easy, and pretty with no problems or issues It took me longer to write this than to do the actual installation. I used a digital camera to help me remember where things were, but a pen/paper works fine. Here's what I did:

1. Turn off the breaker for the cooktop.

2. Remove (2) 1/4" hex screws directly under cooktop. You m... read more

Convection Fan motor was (way) noisy

  • Customer: daniel from sayville NY
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers, Wrench(Adjustable)
  • 33 of 33 people found this instruction helpful
Fan motor has to be removed from the rear. Since this is a (double) wall oven, the hardest part was sliding the oven out of the wall.

First, doors are removed, eight screws that hold the oven in place (along the side of the doorways) are removed. The rear panel inside the oven must be removed to expose the fan. Four screws hold that in place. read more