Quick Question!

Have you ever purchased from PartSelect.com before?

Models > JB940BY3

JB940BY3 General Electric Range - Overview

Get Parts and Repair Help for JB940BY3

If you know the range repair part you need, you can browse the list of all parts on the JB940BY3, or you can search by name or part description. You can also find your part by where it is located on the JB940BY3 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for JB940BY3 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the JB940BY3

[Viewing 3 of 3]
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$2.91

Light Bulb - 40W

Sold individually.

Order within the next 12 hrs and your part ships today!
$25.90

Infinite Switch Kit

The infinite switch controls the stove top surface burner. This switch will work with most of the electrical range models with coil burner elements.

Order within the next 12 hrs and your part ships today!
$101.56

Oven Sensor

This sensor detects the temperature within the oven cavity.

Order within the next 12 hrs and your part ships today!
$118.83

Dual Haliant Element with Limiter - 9" - 2500W

Order within the next 12 hrs and your part ships today!
$18.12

Broiler Pan - Large

Includes the pan and grate.

Order within the next 12 hrs and your part ships today!
$91.72

Large Haliant Burner with Limiter - 8"

Order within the next 12 hrs and your part ships today!
$56.91

Bake Element with Male Push-On Terminals

This bake element is found on the bottom of the oven.

Order within the next 12 hrs and your part ships today!
$7.05

Light Cover

Order within the next 12 hrs and your part ships today!
$1.54

Screws - Package of 12

Order within the next 12 hrs and your part ships today!
$4.83

SCREW

Order within the next 12 hrs and your part ships today!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Oven tempature was approximately 150 degrees to low

  • Customer: James from Austin, TX
  • Difficulty: Easy
  • Time to Complete: 1- 2 hours
  • Tools Required: Nutdriver, Screw drivers
  • 194 of 222 people found this instruction helpful
This repair is EASY if you know how to use an ohm meter. If not, seek help for this step.

SYMPTOM:
The oven (JKP27WOP3WG or JKP27WP3WG and many ovens like it ) was not getting hot enough. Verifying the cooking temperature with an typical oven thermometer, I was able to determine that the oven was cooking temperature was about 150 degrees t... read more

Large burner on dual element burned out

  • Customer: Scot from Oakland, FL
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers, Wrench (Adjustable)
  • 77 of 90 people found this instruction helpful
This was really easy, and pretty with no problems or issues It took me longer to write this than to do the actual installation. I used a digital camera to help me remember where things were, but a pen/paper works fine. Here's what I did:

1. Turn off the breaker for the cooktop.

2. Remove (2) 1/4" hex screws directly under cooktop. You m... read more

Large burner would not get hot

  • Customer: Kevin from Leominster, MA
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Screw drivers
  • 51 of 64 people found this instruction helpful
Repair was very simple. Removed 2 screws under the cooktop, tilt the cooktop back, unplug 4 wires from 8" burner, remove two screws holding retaining clips, install new burner in reverse order. Very simple! read more