Models > JB579GR1

JB579GR1 General Electric Range - Overview

Get Parts and Repair Help for JB579GR1

If you know the range repair part you need, you can browse the list of all parts on the JB579GR1, or you can search by name or part description. You can also find your part by where it is located on the JB579GR1 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for JB579GR1 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the JB579GR1 [Viewing 5 of 5]

$20.25

Bake Element

This partially open-style bake element comes with push-on terminals and is located on the bottom of the oven.

$22.41

Infinite Switch Kit

The infinite switch controls the stove top surface burner. This switch will work with most of the electrical range models with coil burner elements.

$4.27

Single Heating Element Support Clip

This metallic clip is used to help support the broil element. Sold individually.

$89.55

Oven Sensor

This sensor detects the temperature within the oven cavity.

$29.82

Hinge with Roller - Right Side

$34.18

Hinge with Roller - Left Side

$45.29

Broil Element - 240V

This element has push-on terminals.

$5.13

LIGHT INDICATOR

$2.36

Single Screw Only

Sold Individually.

$16.87

Broiler Pan - Large

Includes the pan and grate.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Bake element cracked on its own

  • Customer: Timothy from Cordova TN
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver
  • 470 of 473 people found this instruction helpful
Flipped the breaker. Removed shelf, Find the right size nut socket, unscrew the two screws, pull the element out a little bit, disconnect the wires (on pretty tight), pull out element, clean out any mess in the oven, compare element with new one to make sure its the same size and such, connect wires to new element, replace screws, flip breaker back, tur... read more

Oven took 30 minutes to get to 380 degrees-no hotter

  • Customer: Sandra from Hayward CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 371 of 373 people found this instruction helpful
First I searched this site and read about the repairs - which made me feel like my husband could do it with ease. Then he removed two screws inside the oven, removed the broken element (didn't know it was broken til removed) and replaced the new one - just like that! The real key was being able to read how it was for other people who had already done it. ... read more

Bake element burned out

  • Customer: Laura from N. Little Rock AR
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 187 of 254 people found this instruction helpful
I turned off the power to the oven at the breaker. Then I removed the two screws from the old element, pulled the old element out about 3 inches and disconnected the wires from the element and installed the new one. read more