Models > JAS03*H1

JAS03*H1 General Electric Range - Overview

Get Parts and Repair Help for JAS03*H1

If you know the range repair part you need, you can browse the list of all parts on the JAS03*H1, or you can search by name or part description. You can also find your part by where it is located on the JAS03*H1 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for JAS03*H1 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the JAS03*H1 [Viewing 1 of 1]

$2.52

Light Bulb - 40W

Sold individually.

$3.80

Drip Bowl - 6"

This six inch chrome drip bowl is intended for use with tilt lock style surface mount burner element units.

$2.92

Trim Ring - 6"

This 6 inch high rise burner trim ring is intended for use with detached style low rise tilt lock surface mount burners on ranges.

$3.71

Trim Ring - 8"

This 8 inch high rise burner trim ring is intended for use with detached style low rise tilt lock surface mount burners on ranges.

$6.00

Drip Bowl - 8"

This eight inch chrome drip bowl is intended for use with with tilt lock style surface mount burner element units.

$22.41

Infinite Switch Kit

The infinite switch controls the stove top surface burner. This switch will work with most of the electrical range models with coil burner elements.

$34.01

Tilt Lock Hinge Mounted Surface Unit - 8"

This surface element kit includes an 8 inch element, two wire, 2350 watt surface element, and a terminal block with all three-wire units. These high rise elements do not come with ...

$24.29

Tilt Lock Hinge Mounted Surface Element - 6"

This tilt lock hinge mounted surface element kit includes a 6 inch, two wire, 1350 watt surface element, and a terminal block with all three-wire units. These high rise elements do not come with an attached trim ring.

$1.34

Screws - Package of 12

$4.41

Light Cover

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Two 6" and two 8" burner elements needed replacing on a 36 year old counter range.

  • Customer: Charles from McAllen TX
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers, Wrench(Adjustable)
  • 19 of 23 people found this instruction helpful
First of all I want to thank PartSelect. I have been looking for these parts for over 15 years. I am so happy to have found PartSelect. 1. Turn off Range 2. Turn off Breaker to the Range at your home Breaker Box. 3. Turn on Range to see if you turned off the right Breaker if so then turn Range off. 4. Lift Burner Element up. 5. Take off Silver Trim Ring and ... read more

Needed to replace Drip Pans and Trim Rings for old stove

  • Customer: Cynthia from Tampa FL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 17 of 19 people found this instruction helpful
Repair was simple (just lift off the old and put on the new). What was pleasantly surprising was how quickly I received the parts (amazing)!

Lastly, I've been looking for the correct parts/sizes in stores for years (yes, I should have tried this sooner). I was delighted to finally find a place that actually had the correct parts. read more

The gasket needed to be replaced in top oven, it was brittle and broken.

  • Customer: JoAnn from Auburn WA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 10 of 11 people found this instruction helpful
We took out the philips screws on the right and left side of inside of the oven and two hex head screws on the clip on the top of the oven in the front. Then using a slot screw driver pryed the oven liner out enough to remove old gasket and replace the new gasket. We did see in some online directions that we were suppose to remove entire oven from cabinet... read more