Models > J66RL2BG

J66RL2BG General Electric Cooktop - Overview

Get Parts and Repair Help for J66RL2BG

If you know the cooktop repair part you need, you can browse the list of all parts on the J66RL2BG, or you can search by name or part description. You can also find your part by where it is located on the J66RL2BG by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your cooktop. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the J66RL2BG

[Viewing 1 of 1]
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$2.68

Screw

Sold Individually.

$61.66

Dual Infinite Control Switch - 3000W

$2.89

SCREW-10AB

$17.41

Switch Seal

This part goes between the infinite switch (under the cooktop) and the knob.

$53.18

Selector Switch

$77.86

Surface Element Switch - 1900W

$7.00

Razor Scraper

This is sometimes used to clean glass stovetops.

$103.82

Large Dual Element - 2500W

This dual element can be changed to be used as either a small or large burner. It comes with the element limit switch.

$79.09

Surface Burner Switch - 6"- 1200W

$32.11

Infinite Switch Burner Knob

Sold Individually. This knob accepts a double-flat shaft.

Common Symptoms of the J66RL2BG

[Viewing 1 of 1]
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Cooktop Burner was always on High no matter what the setting on the Control

  • Customer: Raymond from Salt Point, NY
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 26 of 30 people found this instruction helpful
1) Turn Power off at Circuit Breaker
2) Lift Cooktop out of counter top.
3) Remove all dials from controls by pulling straight up.
4) Remover glass plate which covers burners by removing
screws along outer edge.
5) Remove the two top screws from the control to be
replaced (this holds the infinite control to bracket)
... read more

Flat surface stovetop element was burned out

  • Customer: Leslie from Meridian, MS
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers, Socket set
  • 12 of 16 people found this instruction helpful
1. Removed brackets holding the cooktop in place.
2. Removed the cooktop.
3. Removed the screws holding the housing for the elements.
4. Removed bad element.
5 Connected new element.
6. Reassemble read more

Switch had lost infinite control.

  • Customer: Fielding from Bulverde, TX
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 10 of 13 people found this instruction helpful
Removed counter top stove, released zip ties on flex conduit,removed cover glass, removed switch anchor panel, removed old switch,(noting the color of each wire) replaced switch reassembled. read more