Models > J37SE-2 > Instructions

J37SE-2 General Electric Range - Instructions

All Instructions for the J37SE-2
1 - 2 of 2
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
remove and replace
very easy remove the bad bulb install the new one
Parts Used:
Fluorescent Lamp/Bulb
  • Perry from Flushing, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
10 of 24 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Fluorescent lamp bulb
Unscrew the metal rim and remove the glass window. Remove the old bulb by twesting the bulb towards you. Place the new bulb's pins into the slots and twest away from you. Place the metal rims back in place and screw them down.
Parts Used:
Fluorescent Lamp/Bulb
  • Danial from HILLSBORO, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the J37SE-2
1 - 2 of 2
Back to Top