Models > J2B918SEK4SS

J2B918SEK4SS General Electric Range - Overview

Get Parts and Repair Help for J2B918SEK4SS

If you know the range repair part you need, you can browse the list of all parts on the J2B918SEK4SS, or you can search by name or part description. You can also find your part by where it is located on the J2B918SEK4SS by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for J2B918SEK4SS parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$2.52

Light Bulb - 40W

Sold individually.

$59.08

Bake Element - Push On Terminals - 240V

The bake element is found on the bottom of the oven and has male spade terminals.

$2.23

Grate Bumper - Black

Sold individually.

$4.91

Top Burner Spark Electrode

This part helps your burner ignite and produce flame.

$41.27

Oven Rack

Sold individually.

$48.91

Broil Element - 240V

This broil element is found on the roof of the oven.

$5.77

Foot - Leveller

$1.24

Cooktop Mounting Screw

$5.55

Oven Light Socket - With Push In Receptacle

$4.41

Light Cover

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Lower bake Element would not heat.

  • Customer: Ronald from Nassau NY
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Pliers
  • 80 of 82 people found this instruction helpful
First I slid the stove out and unpluged it, then removed two screws,slid out element, disconected two wires, slid new element in to place, pluged two wires in ,put into place and installed two screws, pluged stove back in, and turned on to try. Works perfect. read more

Broken heating element

  • Customer: Paul from anna TX
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers
  • 37 of 39 people found this instruction helpful
1)Turn off power to stove
2)remove 2 bolts holding heating element
3)pull element out of the back of the oven about 8" so that the wire connects is visable
4)pull wire clips off of heating element and remove element from the oven
5)put wire clips on the new heating element
6)push new heating element back into the holes in the back of... read more

terminal block melted

  • Customer: jonathan from willow springs IL
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Screw drivers
  • 16 of 21 people found this instruction helpful
The existing terminal block on my Ge oven/Range had melted due to a loose wire causing sparking and starting the plastic casing of the terminal block on fire and melting it, Part select made the part easy to find and had it at my house in 2 days. All I had to do was remove six screws to take the back sheet metal cover off of the oven. Unscrew the terminal ... read more