Models
>
IV86000
IV86000 Inglis Dryer - Overview
Sections of the IV86000
[Viewing 3 of 3]Manuals & Care Guides for IV86000
Click to downloadInstall
Installation Instructions
(0.73MB)
Install
Installation Instructions
(0.74MB)
Manual
Owner's Manuals
(0.35MB)
Keep searches simple, eg. "belt" or "pump".
![Dryer Thermal Fuse – Part Number: WP3392519 Dryer Thermal Fuse – Part Number: WP3392519](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/11741460-1-S-Whirlpool-WP3392519-Dryer-Thermal-Fuse.jpg)
Dryer Thermal Fuse
PartSelect #: PS11741460
Manufacturer #: WP3392519
The Dryer Thermal Fuse (Thermal Cutoff, Temperature Fuse) is a 2 by ½ inch, white, plastic safety mechanism that stops the flow of electricity to the motor circuit when a dryer overheats. If the fuse ...
$19.63
In Stock
![Multi Rib Belt - 92-1/4" – Part Number: 341241 Multi Rib Belt - 92-1/4" – Part Number: 341241](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/346995-1-S-Whirlpool-341241-Multi-Rib-Belt-92-1-4-quot.jpg)
Multi Rib Belt - 92-1/4"
PartSelect #: PS346995
Manufacturer #: 341241
This dryer drum belt (Whirlpool Dryer Belt, Drive Belt) has four ridges, three grooves and is 1/4" wide, and 92 1/4 inches in length. It comes in black and is made of rubber. The belt transfers the ro...
$17.19
In Stock
![Dryer Cycling Thermostat – Part Number: WP3387134 Dryer Cycling Thermostat – Part Number: WP3387134](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/11741405-1-S-Whirlpool-WP3387134-Dryer-Cycling-Thermostat.jpg)
Dryer Cycling Thermostat
PartSelect #: PS11741405
Manufacturer #: WP3387134
This thermostat (Dryer Operating Thermostat, Dryer Cycling Thermostat, Cycling Thermostat, Dryer Thermostat) is used to maintain a temperature of 155 degrees in the dryer drum. The internal bias heate...
$27.97
In Stock
![Thermal Cut-Off Kit – Part Number: 279816 Thermal Cut-Off Kit – Part Number: 279816](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/334299-1-S-Whirlpool-279816-Thermal-Cut-Off-Kit.jpg)
Thermal Cut-Off Kit
PartSelect #: PS334299
Manufacturer #: 279816
The thermal cut-off (Dryer Thermal Cut-Off Fuse Kit, Dryer Thermal Cut-Off Kit) prevents the dryer from overheating when the dryer high limit thermostat fails in a closed circuit condition. This part ...
$36.58
In Stock
![Maintenance Kit – Part Number: 4392065 Maintenance Kit – Part Number: 4392065](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/373087-1-S-Whirlpool-4392065-Maintenance-Kit.jpg)
Maintenance Kit
PartSelect #: PS373087
Manufacturer #: 4392065
The drum support roller kit (Dryer Repair Kit) allows the dryer to tumble properly by supporting the drum cylinder. The idler pulley provides the tension required for a multi-ribbed belt. The belt att...
$37.48
In Stock
![Rear Drum Support Roller Kit – Part Number: 349241T Rear Drum Support Roller Kit – Part Number: 349241T](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/347627-1-S-Whirlpool-349241T-Rear-Drum-Support-Roller-Kit.jpg)
Rear Drum Support Roller Kit
PartSelect #: PS347627
Manufacturer #: 349241T
The drum support roller kit allows the dryer to tumble properly by supporting the drum cylinder. The kit includes two drum rollers, four tri-rings, and one palnut (or retaining washer). The kit does n...
$14.37
In Stock
![Dryer High Limit Thermostat – Part Number: WP3977767 Dryer High Limit Thermostat – Part Number: WP3977767](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/11742185-1-S-Whirlpool-WP3977767-Dryer-High-Limit-Thermostat.jpg)
Dryer High Limit Thermostat
PartSelect #: PS11742185
Manufacturer #: WP3977767
A dryer high-limit thermostat (High Limit Thermostat, Hi-Limit Thermostat, Dryer High-Limit Thermostat) is a switch that is actuated by temperature change. This high limit thermostat acts as a safety ...
$23.52
In Stock
![Idler Pulley Assembly – Part Number: WP691366 Idler Pulley Assembly – Part Number: WP691366](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/11743765-1-S-Whirlpool-WP691366-Idler-Pulley-Assembly.jpg)
Idler Pulley Assembly
PartSelect #: PS11743765
Manufacturer #: WP691366
This part provides the tension required for a multi-ribbed belt. It also helps the belt rotate the drum and attaches to the idler pulley wheel. If your dryer will not start or tumble, takes too long t...
$17.64
In Stock
![Roller Support Tri-Ring – Part Number: WPW10512946 Roller Support Tri-Ring – Part Number: WPW10512946](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/11755850-1-S-Whirlpool-WPW10512946-Roller-Support-Tri-Ring.jpg)
Roller Support Tri-Ring
PartSelect #: PS11755850
Manufacturer #: WPW10512946
If you notice that your dryer is noisy or will not tumble, you may need to replace the tri ring. This part is triangular, and is less than an inch in size. Tri rings can be found both on the idler pul...
$13.42
In Stock
![Leveling Foot – Part Number: 49621 Leveling Foot – Part Number: 49621](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/1609293-1-S-Whirlpool-49621-Leveling-Foot.jpg)
Leveling Foot
PartSelect #: PS1609293
Manufacturer #: 49621
If your washer shakes or vibrates loudly when it reaches its max speed, check that the leveling legs are even. To ensure that the washer is firmly on the ground using all four legs, adjust the legs so...
$11.40
In Stock
![Heating Element Connection Wire Kit – Part Number: 279457 Heating Element Connection Wire Kit – Part Number: 279457](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/334206-1-S-Whirlpool-279457-Heating-Element-Connection-Wire-Kit.jpg)
Heating Element Connection Wire Kit
PartSelect #: PS334206
Manufacturer #: 279457
This kit is used for electric clothes dryers, and it comes with a yellow wire nut.
$11.06
In Stock
![Drive Motor with Pulley – Part Number: 279827 Drive Motor with Pulley – Part Number: 279827](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/334304-1-S-Whirlpool-279827-Drive-Motor-with-Pulley.jpg)
Drive Motor with Pulley
PartSelect #: PS334304
Manufacturer #: 279827
This motor fits most Whirlpool incorporated dryer brands before 1996. NOTE: Pulley is NOT available separately.
$124.64
In Stock
Questions And Answers for IV86000
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Sort by:
- < Prev
- 1
- Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jackie
March 7, 2022
Why does my dyer make heat sometimes but not every time? I have to use the timed cycle, the auto dry cycle hasn’t worked for awhile now.
For model number IV86000
Hello Jackie, Thank you for the question. This could be a indication the Cycle Timer Switch is faulty during that cycle and not sending the power to the Element to start during the Auto Dry Cycle. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
- < Prev
- 1
- Next >
Common Symptoms of the IV86000
[Viewing 11 of 11]Noisy
Fixed by
these parts
these parts
![Fixing](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/assets/PartImages/347627_1_S.jpg)
![Fixing](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/assets/PartImages/373087_1_S.jpg)
![Fixing](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/assets/PartImages/346995_1_S.jpg)
Show All
Too hot
Fixed by
these parts
these parts
![Fixing](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/assets/PartImages/11741405_1_S.jpg)
![Fixing](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/assets/PartImages/334299_1_s.jpg)
![Fixing](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/assets/PartImages/11741460_1_S.jpg)
Show All
Not Heating
Fixed by
these parts
these parts
![Fixing](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/assets/PartImages/11741460_1_S.jpg)
![Fixing](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/assets/PartImages/11741405_1_S.jpg)
![Fixing](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/assets/PartImages/334299_1_s.jpg)
Show All
Drum Not Spinning
Fixed by
these parts
these parts
![Fixing](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/assets/PartImages/346995_1_S.jpg)
![Fixing](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/assets/PartImages/373087_1_S.jpg)
![Fixing](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/assets/PartImages/11743765_1_S.jpg)
Show All
Marks left on clothes
Fixed by
these parts
these parts
![Fixing](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/assets/PartImages/8691753_1_s.jpg)
![Fixing](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/assets/PartImages/334199_1_S.jpg)
![Fixing](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/assets/PartImages/11773177_1_s.jpg)
Show All
Door won’t close
Fixed by
these parts
these parts
![Fixing](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/assets/PartImages/11741434_1_s.jpg)
![Fixing](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/assets/PartImages/11741661_1_S.jpg)
![Fixing](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/assets/PartImages/11753739_1_s.jpg)
Show All
Won’t Start
Fixed by
these parts
these parts
![Fixing](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/assets/PartImages/11741460_1_S.jpg)
![Fixing](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/assets/PartImages/334304_1_S.jpg)
![Fixing](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/assets/PartImages/11750824_1_s.jpg)
Show All
Heat stays on after drum has stopped
Fixed by
these parts
these parts
![Fixing](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/assets/PartImages/346995_1_S.jpg)
![Fixing](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/assets/PartImages/11741460_1_S.jpg)
![Fixing](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/assets/PartImages/334299_1_s.jpg)
Show All
Touchpad does not respond
Fixed by
these parts
these parts
![Fixing](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/assets/PartImages/11741460_1_S.jpg)
![Fixing](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/assets/PartImages/346995_1_S.jpg)
Show All
Will Not Start
Fixed by
these parts
these parts
![Fixing](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/assets/PartImages/11741460_1_S.jpg)
![Fixing](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/assets/PartImages/334304_1_S.jpg)
Show All
Door Pops Open
Fixed by
these parts
these parts
![Fixing](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/assets/PartImages/11741434_1_s.jpg)
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Dryer was working, but no heat.
First I unplugged the dryer, then removed the back panel, this exposed most all of the wiring and I could see the heater coils.
Not knowing what the problem was I started looking at the coils and could not see any broken parts.
So then checked the thermal fuse for continuity I removed the two wires from it with a small pair of ... Read more needle nose pliers, it was held in place by two screws, once they were removed the fuse came out easily, I checked continuity with a volt meter placing the meter on X1 Ohms and could not get a reading.
I replaced with a new one and put it all back together the way I took it apart.
Then I plugged it in and it worked first time, I now have warm dry clothes.
Not knowing what the problem was I started looking at the coils and could not see any broken parts.
So then checked the thermal fuse for continuity I removed the two wires from it with a small pair of ... Read more needle nose pliers, it was held in place by two screws, once they were removed the fuse came out easily, I checked continuity with a volt meter placing the meter on X1 Ohms and could not get a reading.
I replaced with a new one and put it all back together the way I took it apart.
Then I plugged it in and it worked first time, I now have warm dry clothes.
Read less
Parts Used:
-
ANTHONY from CHESHIRE, CT
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Pliers, Screw drivers
2965 of 3338 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer tub belt broke
Removed the two screws that attatch the lent channel to the top of the dryer, then lifted the top of the dryer by pushing in on the two locking tabs located at the front , left and right , corners of the dryer top with a small flat head screw driver. The top of the dryer will fold back out of the way. At this point I removed the two 1/4 i
... Read more
nch screws that are located on the inside of the dryer front left and right corners that hold the front panel/door to the two side panels. Now I was able to lift the front panel up and set it to the side. The bottom of the front panel that contains the dryer door that I just removed was held on the bottom by two clips that slide into slots on the front panel and did not require any removal to disconnect the bottom of the front panel, just pull up on the front panel. Since the tub was held in place by floating on a seal at the back of the dryer and a seal on the front panel , which I just removed the tub is now free floating except for the two alignment roller wheels at the bottom of the tub. It is easier if you lay the dryer on its back at this point with front of the tub pointing up. I pulled the tub out and cleaned the years of built up lent and removed all the pieces of the old , destroyed, belt. Note, the belt tentioner is located at the front of the motor which on the bottom right hand side. If your belt is broke like mine the tensioner may/will fall to the back of the dryer when you tilt it back, but do not worry. Once the dryer was cleaned up I put the tub back in place , still on its back and made sure the two alignment rollers were in place and rolled freely when the tub was turned by hand. Another note, my original belt tensioner did not have a rolling wheel that the belt rode on , but was a semi-circle smooth surface that the belt remained in constant friction with when the dyer was running, so I made sure the replacement tensioner I ordered with my new belt did have a rolling wheel that the belt would ride on, which I believe will reduce wear and extend the belt life. The new belt came with a diagram of the belt and tensioner routing which was helpful. Note: do not take the tensioner wheel off/apart when trying to route the belt. Follow the instructions routing diagram. The tensioner is held in palce by inserting the bottom back half into the slot in the bottom floor of the dryer making sure it is aligned with the belt pully on the shaft of the dryer motor. The dryer is still on its back side. Now, it was easier for me to route the belt around the center of the tub, following the marks from the original belt, and hold in in place in a few spots with masking tape and then route it thru the tensioner and onto the front pully of the motor. Make sure you have the grooves of the belt against the tub and the grooves are aligned with the pully on the motor. Now you can remove the masking tape that was holding the belt around the tub and spin the tub by hand watching the belt making sure it is not in a bind and is traveling around the motor pully , tensioner and tub freely. Make sure the tub is still sealed on the back side wall. As you turn the tub by hand you can adjust the belt by hand so that is following the original marks around the tub left by the orignal belt. Also double check the two alingment rollers and make sure they are spinning and on track. Now put the front panel with the door on by sliding it onto the two clips that are one the bottom at each side and put the two screws in that hold the front panel to the two side panels. Now stand the dryer back up and spin the tub by hand again making sure it has a good seal on the back side and on the front panel. Pull the top back down and put the two screws in that hold the lent channle to the top. I am not sure when the belt started failing on my dryer, but was amazed at how quiet it runs now. Guess I was use to the extra noise made by a dryer that was about to die. This was a cheap and easy repair and glad I did it myself.
Read less
Parts Used:
-
Ray from Denton, TX
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers, Socket set
1306 of 1412 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No Heat
First tried heating element and thermal fuse with no luck. Ordered thermal cutoff and fixed problem. Had I used an ohm meter first I would have determined problem before having ordered heating element and fuse, as both had resistance. I wast just lazy and ordered the took the most common failed components first before taking dryer back
... Read more
off.
Read less
Parts Used:
-
Vernon from Niceville, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver
886 of 949 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!